Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

OT - latest project (a little rambly)

Posts

OT - latest project (a little rambly)

#1

OT - latest project (a little rambly)

Bill Houghton, Sebastopol, CA

>As my wife put it this afternoon, we are now committed to this bathroom remodel.

Usual structural issues that we encounter in This Auld Haus every time we open a wall, although I already knew we were going to need to blow out the outer wall.

So far, this project's unplanned excursion seems to involve reroofing the area above the bathroom to correct some issues.

I'm having fun showering outdoors, using a rig I assembled by the hot tub (although, at my creative son's suggestion, I'll probably hook up the mixing valve from the old tub/shower there so I can adjust heat directly at the shower, instead of at the entryway sink, as I did this am). The joys of state park camping again, without the tent.

Milestone: for 36 years, we've had a 4" cast iron vent pipe running up the outside wall, prominently in sight as you walk in from the driveway - the remnants of that vent are visible in the two elbows at the foundation. That will be gone now, as we vent the plumbing through runs inside the walls and out the roof, like everyone else does.

Previous owners created finish walls by nailing up random widths of 1" thick redwood (mostly - some pine and fir), gluing newspapers over the boards, and then wallpapering over the newspapers. We've found 1942 and 1944 dates - I'd always thought this area of the house was done after World War II, but perhaps it was during the war.

Hand tool content on this project is likely to be all but nonexistent, except for the usual ancillary use of chisels and stuff. Lots of sawzall action today.


img

Re: OT - latest project (a little rambly)

#2

Jack Guzman from Maine

A sledgehammer is a hand tool

Jack Guzman from Maine

>...so is a prybar.---Jack

Re: OT - latest project (a little rambly)

#3

Re: A sledgehammer is a hand tool

Bill Houghton, Sebastopol, CA

>By that standard, so is a wheelbarrow, a tool of which we made a great deal of use.

It's kind of interesting, now, being the laborer for my very competent carpenter son - lovely watching him being smarter than me.

Re: OT - latest project (a little rambly)

#4

perfect opportunity

John in NM

>To invent that eggbeater sawzall you've always dreamed of!

I've done a couple remodels that had a stage like that, no fun now but always worth it in the end. Don't think I've had to shower in the yard, but did spend a month or so cooking in the garage once.

What are you going to do with the vent? I've never had to tie into cast iron, how hard is it to move the vent into the wall?

Thanks for the pic Bill, looks like fun!

Re: OT - latest project (a little rambly)

#5

Re: perfect opportunity

Bill Houghton, Sebastopol, CA

>The cast iron has been serving just that bath and the entryway sink for a year and a half - ABS that ties into the DWV at the front corner of the house will be extended to pick those up, and the cast iron is going away, although I don't plan to dig it up, except right below the bathroom. Future archaeologists can have a great time finding it.

While I was in the bathroom removing light fixtures, my son was removing the vent by hitting it with the sledgehammer (yes, Jack G., using a hand tool) and shaking it back and forth to break the poured lead joints (which are VERY weak). I heard some ratting sounds, and looked down to see the toilet dancing a jig.

Re: OT - latest project (a little rambly)

#6

I remodeled houses when I was in grad school

Bruce, a MN Galoot

>and I learned very quickly that the phrase "they sure don't build them like they used to" was certainly true. And a good thing, too. I marveled that some of those houses were still standing after 75 years.

Bruce, who is chock full of empathy in MN.

Re: OT - latest project (a little rambly)

#7

I'm looking forward to that day...

Alan DuBoff

>When my son can out-think me on a project. I think it will happen at some point, but not soon, he's just going off to college this week. At least he hasn't shown that type of thinking that has been able to solve the real world problems, such as fixing things in the house, or such like that. Solving plumbing, electrical, or construct problems in a house is something that time lends to, IMO.

I hear from most of my friends that it does in fact happen at some point and the curve starts to swing...I say, bring it on! :-)

Re: OT - latest project (a little rambly)

#8

Swear words are hand tools

Neal in San Jose

>They are cholesterol powered, so they fit the definition. You are likely to use a lot of them (DAMHIKT), so this posting does have a hand tool content!

Re: OT - latest project (a little rambly)

#9

I was pretty dumb when I first went out into

Bill Houghton, Sebastopol, CA

>the world. I remember, once, when I wanted to protect the surface of something I was hammering, putting a file over the surface and hammering on that - imagine my surprise when the file exploded.

Probably, he'll learn how to do things. Certainly, there'll be something in which he's smarter than you.

Re: OT - latest project (a little rambly)

#10

He certainly will!

Alan DuBoff

>Bill,

He's a smart kid, and I'm certain he will be fine once he gets more experience under his belt. He's not very interested in home stuff, but we know how that changes when one gets their first house! ;-)

He's got 4 years of schooling, at minimum to go, before he will need to solve the real world problems, and he has taking a liking to some of the wood and metal working I've done.

I am still very excited that he was even accepted to UCLA, I think he has a bright future ahead of him.

In some ways he is much smarter than me already, as an example, he knows when to keep his mouth shut! *lol*

Re: OT - latest project (a little rambly)

#11

Congratulations are in order!

Wiley Horne--So. Calif.

>Alan,

I know you and your wife are more thrilled with your son's success than even he is. It takes a crackerjack student to get onto a UC campus. It speaks well of him, his family, his teachers--so many had to contribute. But only he could get the marks he had to get.

Wiley

Re: OT - latest project (a little rambly)

#12

He did in fact accomplish it himself...

Alan DuBoff

>Wiley,

He did in fact do it himself. He had some really good ideas in his portfolio, and he leveraged his teachers in 2 schools. His art teacher has inspired so many kids.

Funny though, when we were at Open House and they took us through the art program, they showed us the shop. All of the sudden my son had greater appreciation of the tools I have, and the things I do with them.:-) Although we worked on a couple of his projects together, I mostly provided guidance and materials. He applied it in very unusual ways...As an example...I gave him some leather pieces that were cutoffs and they had been dyed. He created a roll of leather toilet paper. In fact this was made from the cutoffs from my WoodCentral toolmaking contest entry...:-)

The UCs are indeed tough to get into these days, L.A. and Berkeley are referred to as the "Public Ivys" as a joke amongst the kids.:-)

We're certainly proud of him, won't deny that! ;-)


img

Re: OT - latest project (a little rambly)

#13

Very clever art piece

Bill Houghton, Sebastopol, CA

>

Re: OT - latest project (a little rambly)

#14

One last clever piece...

Alan DuBoff

>Bill,

Here's one last clever piece for you. This is based on the famous Escher print of 2 hands drawing each other. This piece is called Escher's Illusion.

The dragon fly is real. It really looks like it is drawn, but it is in fact a real dragon fly, sprayed with some type of lacquer to preserve it.


img

Re: OT - latest project (a little rambly)

#15

Re: He did in fact accomplish it himself...

Victor Parisian

>No jokes about horse butt from here.

Re: OT - latest project (a little rambly)

#16

Re: Swear words are hand tools

Bob Demers

>LOL. Myself, being fluent in both of Canada's official languages (French-English) i have a wide repertoire of chosen words to pick from at time :-)

BTW Bill, thats how I spend my summer vacation this summer. We went to NS to work (slave) on our son's house. Totally gutted the bathroom to the studs and rebuild from scratch. Yes there were some unexpected surprises. The request was to show him how its done, so we worked together on it. Slow me down a bit, but it was a great experience.

Bob

Re: OT - latest project (a little rambly)

#17

We're now down to replacing foundation

Bill Houghton, Sebastopol, CA

>Our 1895 house probably didn't have a foundation originally, and the added-on sections, like this bathroom (originally part of the back porch, we think), have rather...eclectic...creative...cruddy foundations. When we started examining it, it became clear that ripping it out over that six-foot area and repouring would be a lot better - there's never any steel in the old foundation sections, so 45 minutes with the rotary hammer had it in movable sections.

Today, our son and our yardworker are leveling and pouring for pads to carry relocated girders under that area. We're getting ready to go see Pete Seeger, multiple members of the Guthrie family (Arlo, his daughter, and I don't know how many others), and other folkies down in SF, so I've been doing light stuff - getting sacks of concrete from the hardware store, setting out the mixing pan, cutting apart some of the old stuff for the dump runs, etc.

Re: OT - latest project (a little rambly)

#18

Re: We're now down to replacing foundation

Bruce, a MN Galoot

>There's just no substitute for doing it right.

That concert sounds like one I'd give eye teeth to see.

Bruce, envious in MN

Re: OT - latest project (a little rambly)

#19

Family traditions...

Bill Houghton, Sebastopol, CA

>Three girders over ten feet, supported by 2x2 concrete pads; my son's continuing the family tradition known as "cast iron engineering." The tile should have plenty of support....

Re: OT - latest project (a little rambly)

#20

Re: Family traditions...------WebKitFormBoundarysS

Glenn Madsen near San Francisco------WebKitFormBou

>There's a saying in my family, too. "It ain't pretty, but it's hell for strong!"

------WebKitFormBoundarysSk6FZm1FEL+j+Q3

Re: OT - latest project (a little rambly)

#21

In my family, the saying is,

Bruce, a MN Galoot

>if it's worth building, it's worth over-building. My grandfather is reputed to have used more than a ton of nails in one barn he built.

Bruce, carrying on the tradition.