Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Driving by again

Posts

Driving by again

#1

Driving by again

James Watriss

>Sorry for the wait, guys. There's been a lot going on, including a move into a new apartment, and getting everything settled in has been challenging.

Here's a shot of the saws mixed in with 2 of the usual suspects... a couple of no-name saws I picked up after someone left them lying around the internet. :-P


img

Re: Driving by again

#2

'Bout time!

Alan DuBoff

>I'm gonna guess the top and 3rd one down.

I would say maple, but suspect that the handles are beech to be authentic...;-)

Re: Driving by again

#3

Re: Driving by again

James Watriss

>I really only had time to drop these of in the shop the other day, I didn't have the time I needed to give em a real test-drive. But I did throw some lines on a scrap of maple, and ran em through, just to see.

The saws cut cleanly, and they start very smoothly. The DT starts more smoothly than either the LN progressive, or the Gramercy. I was surprised by the second... the Gramercy has very fine teeth.

And they do cut very straight.


img

Re: Driving by again

#4

Re: Driving by again

James Watriss

>One last shot...

I am pretty sure the handles are beech. Fit and finish is pretty good, all things considered. He didn't burnish the wood to a high luster, but I didn't really expect that he would. He made sure to give me saws with teeth that were different from each other that each would be a distinct option, so it's very clear that he intends that they'll be used. And they will, believe me.

A side note, the front teeth are slightly smaller. I'm assuming he did this on purpose, as both saws have the same feature, I'm assuming to help it get started.

The handle on the carcase saw is slightly smaller, and fits my hand very well. The DT is a little wider. But, here's the thing that continues to puzzle me in idle moments... some handles don't feel as good in the hand, but perform very well anyway. A static grip is not the same thing as a handle that's attached to a tool in motion, and there are clearly elements of the handle that give feedback to the hand and allow us to work the tool in a straightforward manner. The DT doesn't feel wide in use. The gramercy, by contrast, is very comfortable in the hand, but feels a bit smallish in use, to me. Or maybe 'delicate' is a better word. It still works, though, so who's to say, really. Maybe someday I'll take on that challenge myself, and bring it out of the realm of idle moment musing.

The bad news.

There was a note in the box with the saws, and it does sound like Adam isn't going to be making any more saws. Not for a while, anyway.

Honestly, I'm not sure I blame him. I can't really say for sure, but my guess is that this was a side project he got into with really god intentions, and probably got sideswiped by the whole thing. I've had similar things happen. "Hey guys, I think I can..." turns into 'Oh, crap... what have I gotten myself into?"

I think I got my order in roughly a week after he announced the saws. I just got them recently. I get that custom work takes time, so I'm not complaining, much... but I did check in periodically over the intervening time, and I recognized the tone of the responses, since I've had to give similar answers myself. (It's on the bench right now, don't worry, it's coming...)

Please understand, that's not a criticism, it's sympathy. I give him big kudos for taking this project on, for delivering a tool that works really well, and not deciding halfway through to quit taking orders altogether. My guess is that the scale of this really did turn it into a part time job all on its own... and between writing, traveling, lecturing, blogging, putting his funny pants on, performing, taking his funny pants off... well, I imagine the least relaxing thing to do was go back to filing saws at the end of each day, knowing that he had a waiting audience with orders in, and a bigger audience waiting to hear how the saws performed.

...No stress...

So, now I have a pair of really nice, finely performing saws, made by Adam Cherubini. What am I going to do next?

Use 'em. Duh.


img