Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Made a nice find today

Posts

Made a nice find today

#1

Made a nice find today

Bart Leetch

>I found a nice Fillister plane today made by T.Tileston od Boston on Front Street stamped into the toe. $45.00 It's in great shape no cracks or checks.

The wedge is stuck tight what is the best way to remove it without damaging anything?


img

Re: Made a nice find today

#2

Moses Yoder

Re: Made a nice find today

Moses Yoder

>Have you tried tapping on the back with a mallet; perhaps tape a scrap block on the back and hammer on it pretty hard while holding it in the other hand; that is the way they are usually removed. Or put it in the oven on 250� for 15 minutes or so to dry it out and see if it comes out. Nice find.

Re: Made a nice find today

#3

Cryo?

Bill Houghton, Sebastopol, CA

>I was wondering the opposite: whether freezing the plane would cause the iron to shrink enough to loosen the wedge. I don't think wood shrinks much in the cold, but steel should.

All speculative on my part, though.

Re: Made a nice find today

#4

Re: Made a nice find today

Wiley Horne--So. Calif.

>Hi Bart,

Does the wedge appear to be hung at the sides, or front/back, or everywhere?

I suggest you try to get the iron to move one way or the other, working it laterally and down, after moving the fence back to get it out of the way. Try to get the iron out, then work on the wedge. Hitting the plane to move the iron only works when the plane is in normal use, and the wedge is operating properly. Won't extract a frozen wedge, but will make considerable dings in the wood.

Wiley

Re: Made a nice find today

#5

Re: Made a nice find today

Bart Leetch

>Thanks everyone for the suggestions. I took the path of least resistance. I put it in the freezer for about 30 minutes & then put a piece of plywood against the back end & used wood mallet to rap om it & the wedge backed right out.

Thanks again.

Re: Made a nice find today

#6

Re: Made a nice find today

Wiley Horne--So. Calif.

>Just like I said, 'ain't no way that's gonna work. Nosirree.' Congratulations Bart, and to Bill Houghton and others, who got it right. Really pretty plane.

Wiley ..... eating crow, ummmm, not so bad

Re: Made a nice find today

#7

Re: Made a nice find today

Todd Hughes

>The best way and the most easiest is to just with the plane upside down clamp the wedge in a padded vise and then with a soft mallet tape the body of the plane away from the wedge as you are holding it. I do this all the time and works great and after many dozens of planes never had a problem.

Your plane from the mark you described was probably made in the 1840s

...Looks to be in OK condition and will probably clean better but I think $45 was a top end high price for it in my opinion and from my experance.....Todd

Re: Made a nice find today

#8

I like the oven...

John in NM

>Mostly since I'd expect the stuck wedge to be mostly swelled against the sides of the mortise. Wedges get very tight against the iron in use but are still easy to loosen, so I've always assumed the problem was when the plane body and wedge both swelled due to moisture.

Only a matter of time now before a plane company comes out with line of "cryo-hardened beech", I think you should get the patent now, make your fortune ;)

Re: Made a nice find today

#9

We can always count on Todd to impart wisdom

Bill Tindall, E.TN

>Thanks for the stuck wedge tip

Re: Made a nice find today

#10

Todd, did you see.....

Marv

>the other filing guide that was on eBay at the sametime yours was, the one you sold for $66? Do you feel that $66 was a good price?

That other one was mine. Mine sold for only $33. Yours had all the original parts. I made the parts for holding the file. The stainless steel file handle I made went unnoticed. I was going for making it a useful tool, not just a collector's item.

Marv

Re: Made a nice find today

#11

Re: Made a nice find today

Bart Leetch

>"...Looks to be in OK condition and will probably clean better but I think $45 was a top end high price for it in my opinion and from my experience.....Todd"

Todd you should have seen some of the junk people were trying to sell for much much more. I saw a Stanley block plane for $10 that used to have a adjustable mouth. It's now rusted shut & the blade & body looks like one piece. I saw a #8 Stanley for $79 it would have cleaned up good but I normally get them for around $40 or a little more.

They are still trying to sell them at tourist inflated for display only prices & the economy won't support it.

Re: Made a nice find today

#12

Re: Todd, did you see.....

Todd Hughes

>I normaly don't look at stuff on the ebay so I didn't see the other ones.

I have sold them for more then $66 in the past but I was very happy with the $66 esp. since I bought the thing for $2 off a guy at the flea market that had no idea as to what it was.

It was complete and needed nothing more then about a 5 min. cleaning to go.

With things like this it very seldom makes any sense to put much time or effert into them like making parts etc....just won't pay off.

Better not to buy tools like this in the first part but if you get them so cheap you can't pass them up then throw them into the parts box or sell them as they are for parts.

I think these filing guides for the most part like most other tools are being bought more by users then collectors....Todd