Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

anything special about gluing satinwood?

Posts

anything special about gluing satinwood?

#1

anything special about gluing satinwood?

Bill Tindall, E.TN

>I will be gluing alternating bands of mahogany-satinwood. The satinwood appears very dense. Is there anything special one needs to be concerned with when edge gluing satinwood, ie does it glue like a typical hardwood?

Re: anything special about gluing satinwood?

#2

Re: anything special about gluing satinwood?

roninkokomo

>I have glued up satin wood to other woods with no trouble. BUT my application was small and medium sized boxes

Re: anything special about gluing satinwood?

#3

Re: anything special about gluing satinwood?

Wiley Horne--So. Calif.

>Billl,

I've recently glued satinwood to satinwood, using both Old Brown Glue and Titebond II. Nothing out of the ordinary observed.

Wiley

Re: anything special about gluing satinwood?

#4

Re: anything special about gluing satinwood?

Brent Smith in Montreal

>I did some table tops in Honduran Mahoganey with a Satinwood banding a few years back. I used Titebond II with no glue line failures to date.

Re: anything special about gluing satinwood?

#5

Ellis Walentine

No problems here

Ellis Walentine

>I built a large display cabinet, with doors and lighting and glass shelves entirely of East Indian Satinwood. I used yellow glue and had no adhesion problems, but I do recall some telegraphing glue lines. I think I'd use hide glue if I ever do it again.

Ellis

Re: anything special about gluing satinwood?

#6

Re: anything special about gluing satinwood?

Stephen Shepherd in the State of Deseret

>Use hide glue, either liquid or the hot stuff and you won't have problems with creep.

It is also a good idea to tooth the surfaces prior to gluing to insure a good joint.

Stephen

Re: anything special about gluing satinwood?

#7

Chris Scholz

Why bother? Good joinery should work without glue!

Chris Scholz

>

Re: anything special about gluing satinwood?

#8

Wow!

roninkokomo

>Now there is a drive by shooting , if there ever was one !!

Re: anything special about gluing satinwood?

#9

need a suggestion

Bill Tindall, E.TN

>what sort of locking joint would you suggest for edge gluing this banding strip assembly that will be sliced into 0.100" veneer after assembly?

Re: anything special about gluing satinwood?

#10

Re: anything special about gluing satinwood?

R.J.Whelan - Sierras, California

>Bill ... whenever I'm unsure about how a particular species will react with adhesive (of any kind) I clean the surfaces to be glued with lacquer thinner before applying the adhesive. This may have saved me problems countless times, or none at all.

Good luck ... rj

Re: anything special about gluing satinwood?

#11

Chris Scholz

Re: need a suggestion

Chris Scholz

>Sounds like you are out of luck with that design (i.e. might have to resort to glue). Would a re-design be possible?

Re: anything special about gluing satinwood?

#12

Re: need a suggestion

Wiley Horne--So. Calif.

>Hi Chris,

Bill is talking about gluing up a 'brick' of alternating layers of wood, from which he can bandsaw strips of banding. The banding will then be glued to the project, and that's how it has been done in the western world for centuries.

Wiley