Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

What do you do while glue dries?

Posts

What do you do while glue dries?

#1

What do you do while glue dries?

Derek Cohen (in Perth, Australia)

>What do you do while glue dries?

I never seem to have enough hours in the day. Hyperactive? Heh. Woodworking is generally reserved for weekends - if there is nothing on in the family - and, if I get lucky, an afternoon off during the odd week. I am aware that many do not even get as much time as this. So we have to make every moment count.

The current project is a small freestanding wardrobe (closet) for the spare room for guests. It will have some hanging space and a couple of drawers. Essentially a big dovetailed box. The panels are Tasmanian Oak. Here they are, some glued and some waiting for the glue to dry.


While glue dries I build small things.

For several months I have wanted to make a heavy duty marking knife. I have plenty of detail/dovetail knives for detail work, but everyone needs a knife you can lean on when scribing deeply, such as shoulder or dado lines which will then be undercut in preparation for sawing.

I bought a couple of $5 kiridashi knives (Japanese laminated steel) on eBay about two years ago. These are �� wide and perfect. One will do the job. Just need a decent handle, something ergonomic and pleasing to the eye.

I have been mucking about with Indian Ink as a dye for wood. It has a nice effect � you can make it as dark as you like � from an ebony-dark to a slightly transparent-let-the-grain-through tint. I tried for a mid position. It looks darker here.


Back of blade:


I filled in the hole at the end of the handle (from the lathe) with a brass screw�


And it works wonderfully. I ground a new bevel (25 degrees with a 35 degree tip � reduced from about 25 degrees to avoid breakage). Then honed the blade freehand on Shaptons to 12000. It is sharp enough to shave with.


I showed the knife to Jamie, my 16 year old son. His head nodded appreciatively and his eyes gleamed (I know he loves knives but otherwise is not interested in woodworking). Anyway, I had a piece of the kiridashi knife over, so I made him a miniature version. Mine is 6 �� long. His is just 4�. It�s so cute.


Oh well .. the glue has dried and it is time to flatten panels ..


So what do you do while the glue dries?

Regards from Perth

Derek

Re: What do you do while glue dries?

#2

Re: What do you do while glue dries?

wilbur

>Obviously, not as much as you do, Derek. :@)

Either that, or you are allowing way too much time for your glue to set. :@)

Re: What do you do while glue dries?

#3

Forgot to add

wilbur

>Very mice looking knives!

When you said that you adjusted the angle from 25 to 35 degrees, are you referring to the bevel angle or how pointy the knife looks as you look at it from above?

Re: What do you do while glue dries?

#4

Another tip (pardon the pun) ..

Derek Cohen (in Perth, Australia)

>Hi Wilbur

I adjusted the pointy end to 35 degrees. The original angle was about 25 degrees, but this was too fragile. I had already broken it once.

In addition - this cannot be easily seen in the pictures above - the tip has a slight bevel to strengthen it further.


Regards from Perth

Derek

Re: What do you do while glue dries?

#5

Why, come check WC, of course !

steve mackay

>

Re: What do you do while glue dries?

#6

With Hide Glue, I get a good nights sleep.

Stephen Shepherd in the State of Deseret

>

Re: What do you do while glue dries?

#7

Re: With Hide Glue, I get a good nights sleep.

Pam Niedermayer, Austin, TX

>Yeah, same here, gluing is always my last task of the day.

Pam

Re: What do you do while glue dries?

#8

What do I do while glue dries?

Scott Burr in Ben Lomond CA

>Upon waking after passing out, normally it involves frosty adult beverage or two. Then a shower.