What is wrong with this picture?
Stephen Shepherd in the State of Deseret
>Isn't that Wilbur Pan using a Western Saw? And look at the speed with which he uses this backwards saw.
Stephen
Knowledge You Can Build On — Est. 1998
What is wrong with this picture?
Stephen Shepherd in the State of Deseret
>Isn't that Wilbur Pan using a Western Saw? And look at the speed with which he uses this backwards saw.
Stephen
BUSTED!
Hank Knight
>Ah, Wilbur, you'll never live this one down!
Hey now
Bill Houghton, Sebastopol, CA
>we shouldn't give Wilbur a hard time for trying alternate technologies. Who knows, maybe he'll wind up with a bunch of saws with wheat carving on the handle.
Re: Hey now
Hank Knight
>Bill said "Who knows, maybe he'll wind up with a bunch of saws with wheat carving on the handle."
Nah, not a chance. Wilbur is a True Believer. ;>)
Re: BUSTED! NOT!
Victor Parisian
>Obviously a complete retoothing so it cuts on the pull stroke.
BTW Wilbur you owe me for this.
Victor - in Hot and Humid (I'm melting...) Houston
My story
wilbur
>At WIA I somehow got talked into participating in this contest, which consisted of ripping a 4/4 piece of pine 3 feet long to a line, then planing the sawn edge flat and square, and then marking and cutting a tenon in another piece of 8/4 stock. Judging was done on speed and accuracy. Imagine my surprise when I only found western saws and planes available for use in this contest. I swear that when I picked up the rip saw, the first thing I said was, "Isn't this thing backwards?" :@)
My time really sucked overall, but I think I did a pretty good job cutting to the line on the 3 foot rip cut, and I know I did a very good job on cutting the shoulders of the tenon, even though I was using a western tenon saw. My planing was square, but I had some flatness issues at one end of the board. My alibi is that I was making a sprung joint. :@)
I'd like to thank the photographer for using a slow shutter speed so it looks like I'm really whaling on this board. :@)
And after the experience of making a 3 foot long rip cut with a western rip saw, the first thing I did when I got home was to give a big hug and kiss to my wife, then my two boys, and then my bandsaw. :@) I was really happy to see my ryobas, too.
Very Cool. Thanks for the info.
Victor Parisian
>
Re: My story
Marv
>Wiley,
The picture makes it look like you are sawing into the bench.
Marv
Re: My story
Hank Knight
>Yeah, yeah. Heard it before. Out of town, bad crowd, that carved applewood handle was so sweet, etc. Still BUSTED! ;>)
Re: My story
wilbur
>I can see that the next time I try this I'll have to do it at the AWFS.
After all, what happens in Vegas.... :@)
Re: My story
wilbur
>Hi Marv,
It's just the angle of the shot. The rip cut was just taking off about 1" off of the edge of the board.
;>)
Hank Knight
>
Re: My story
Stephen Shepherd in the State of Deseret
>Wilbur,
Glad to throw you under the bus on this one.
Stephen
Re: My story
wilbur
>Hi Stephen,
Now that I think of it, that board seemed to be really more like a piece of MDF, carefully painted to look like pine. I also seem to recall the initials "SAS" painted in the corner.
Does this jog any memories? :@)