Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Yet another eBay rant

Posts

Yet another eBay rant

#1

Yet another eBay rant

Bill Houghton, Sebastopol, CA

>Is this seller serious? Was there an "improved" Disston saw on which the blade curved at the top as pictured (link below)? I'm dubious, since the seller refers to it as a backsaw.

I like the line, "Overall a nice antique saw in very good condition."

Re: Yet another eBay rant

#2

Moderator must of removed link :).

Brent Smith in Montreal

>

Re: Yet another eBay rant

#3

Link please....*grin*

Marv

>

Re: Yet another eBay rant

#4

One thing for sure on this forum *LINK*

Bill Houghton, Sebastopol, CA

>I'll never get a swole head about my new role.

Thanks, Brent and Marv. Senior moment; link is below


See? Here it is! It really is!

Re: Yet another eBay rant

#5

Whoa...that is all messy...

Alan DuBoff

>Bill,

First, that ain't no backsaw.

It's also been quite abused by the pics, as the front was cut down in that odd way, IMO.

You can see on the rear that it has been resharpened/reshaped several times, so it has been well used, and the handle was broken and has a screw in it with a massive amount of tape.

Quite the beater, IMO.

Cheers,

Alan

Re: Yet another eBay rant

#6

that blade is too crappy

Bruce, a MN Galoot

>to even cut up and make scrapers.

Uffda!

Bruce

Re: Yet another eBay rant

#7

Yeah, and BIN is cheaper than auction price...:-/

Alan DuBoff

>Funny you can Buy-It-Now cheaper than you can get it on auction. First time I've seen that...*lol*

I'll tell you something though, somebody liked that saw and it's been sharpened a LOT. I bet it was a favorite of somebody's...

Cheers,

Alan

Re: Yet another eBay rant

#8

Re: One thing for sure on this forum

Marv

>So, Bill, are you going to buy it?

It's a Disston D8 panel saw. The panel saws had 4 screws while the regular handsaw, 26" has 5 screws. The blade of course has been drastically modified. These saws were made as short as 16" tooth edge.

I saw that auction when it was first up for auction. I got a good chuckle out of it then. The description emits the most humor.

Marv

Re: Yet another eBay rant

#9

Don't really need it

Bill Houghton, Sebastopol, CA

>As part of rewiring the shoplet, I had to clear a lot of stuff out of it, including my saws in their exotic saw till (dowels from the ceiling joists). I count 57, not counting the fret, coping, and similar saws.

I think I'm going to lighten up as part of putting them back. Some of the keepers will be obvious, but I'm not sure what the criteria will be for the middle group - not pristine, but not junk. Maybe I'll keep those with wheat carving :{)}

Re: Yet another eBay rant

#10

Re: Don't really need it

Victor P

>You could recycle the tape on that handle to insulate some wires or something.

Victor - in Hot and Humid Houston

Re: Yet another eBay rant

#11

Flooring Saw

Todd Hughes

>Looks like a Flooring Saw, a saw which were shaped like this, hard for me to tell though but doesn't look like it has teeth on the front top of the blade like it should. Maybe never got around to cutting the teeth or maybe sombody filed them out...I don't know

Disston and others made Flooring saws but was also pretty common for owners to make them thierselves too out of regular old worn saws like this one. I have seen a good many over the years and sold one on ebay befor that was made out of a D8 for about $50, it's handle was damaged but not as bad as this one.

$24?....I don't know but I do know you don't catch no fish unless you put your bait in the water....Todd

Re: Yet another eBay rant

#12

Re: Don't really need it

Marv

>Well, we all know that a wheat carved saw handle makes the saw cut better;-))

Marv