Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Blackened Trunk Handles

Posts

Blackened Trunk Handles

#1

Blackened Trunk Handles

Bill Tindall, E.TN

>You have all seen the trunk before. It was impossible to move in its handleless state so I needed to add some. I ordered these handles from Whitechapel. They seem to be cast steel/iron and they arrived with a surface coating of light rust. I thought black would be a suitable treatment. At the recommendation of WC participants I coated the handles with a light coating of peaunt oil (it was what was handy) and baked at 550 F. A light coating was important. A couple of places where it was thicker it looked like burned oil instead of black handles. I finished with a coat of linseed oil, uncharred.. The iron was to rough to wax or that is what I would have done.

Thanks to all for the blackened suggestions.


img

Re: Blackened Trunk Handles

#3

That is really

Wiley Horne--So. Calif.

>beautiful, Bill! The chest and the handle. The oil@550F worked great. Doesn't look like there's any build.

Wiley

Re: Blackened Trunk Handles

#4

Re: why did the picture fail?

Pam Niedermayer, Austin, TX

>That's really pretty. I'm a sucker for round feet.

Pam

Re: Blackened Trunk Handles

#5

Stunning...simply stunning!

Alan DuBoff

>Bill,

This is a gorgeous piece!

Very well done.

Cheers,

Alan

Re: Blackened Trunk Handles

#7

Re: Super Job

Ron in Sterling, CT

>I really like the matching of the grain. Each side looks like one board. Stunning.

Ron

Re: Blackened Trunk Handles

#8

Bun feet

Bill Tindall, E.TN

>they are called bun feet and they were popular in the early 1700's. I love them too. I made a practice pair (I turn two at a time on one spindle because it is easier to get them the same shape that way) on the lathe and I was not satisfied with them. I took them to a class with Allan Batty, a professional English turner with 50+ years experience turning. He scrutinized my feet, chucked them in the lathe and I am sure didn't remove more than 3/64" from a couple of areas. BAM a pleasing shape just jumped out. The class taught me that it takes years of experience, experience that only a professional turner will ever get, to reach perfection in spindle turning.What is on the trunk is the best of 12 feet I made.

Re: Blackened Trunk Handles

#9

each side is one board

Bill Tindall, E.TN

>It was a dead oak I cut almost 40 years ago. The color of the wood was exceptional maybe because it was a dead tree, I don't know. I have been looking for some excuse to use this wood. I don't build much from oak. There are a couple of worm holes but they are not too obvious.

Re: Blackened Trunk Handles

#10

Re: Bun feet

Pam Niedermayer, Austin, TX

>Did you try carving with drawknives and spokeshaves rather than turning?

I even like the modern oblate bun feet, just something about them.

Pam

Re: Blackened Trunk Handles

#11

Coopered lid

Wiley Horne--So. Calif.

>I agree Jim. And it's incredible how perfectly that coopered lid meets the side. I remember Bill said there was some kind of pre-glueup procedure to simplify the smoothing of the underside of the coopering. But that wouldn't explain the perfection of the closure he has made.

Wiley

Re: Blackened Trunk Handles

#12

Re: Coopered lid

Pam Niedermayer, Austin, TX

>It sure is, and, according to the photo, the way it perfectly extends the taper from feet to top. Correct me if I'm wrong, but it appears the trunk at the base is maybe an inch or two smaller than the trunk at the top. Extremely well done.

Pam

Re: Blackened Trunk Handles

#13

Re: why did the picture fail?

Hank Knight

>Bill, I would like to join the chorus. That is a beautiful piece. I like everything about it. The oak is stunning, the coopered top is marvellously executed as is the joinery, the bun feet and the finish. Excellent work. How did you cooper the top, with hand planes or were electrons sacrificed for the greater good?

Hank

Re: Blackened Trunk Handles

#14

Re: why did the picture fail?

Dan Donaldson

>I looked at the post without the picture and for some reason, it didn't uplaod anything. Did you by any chance do a preview before you posted? If not, then I have no clue. Everything looks fine except that there is no picture uploaded.

Re: Blackened Trunk Handles

#16

coopering the top

Bill Tindall, E.TN

>All by hand, and quite easy and perfect. Perfect not because I did it but because Neptune's procedure ensures it so. I owe Ellis an Article on how to do it. It is a technique I learned in a Will Neptune (my hero) seminar. If you ever had an opportunity to attend a Neptune seminar or class, don't mis it. He is an applied(to woodworking) geometry genius.

Re: Blackened Trunk Handles

#18

Re: coopering the top

Hank Knight

>I've read some of Will Neptune's stuff (can't remember where, maybe FWW in the early days) and I agree with you, he's a great craftsman and teacher. I watched Garrett Hack cooper a cabinet door with hand planes at a workshop in Maine several years ago. It looks pretty straightforward, no figuring angles with trig or any of that mathmatical stuff, but I haven't had an opportunity to try it yet. I'd be interested in your write-up on Neptune's method.

Again, you did a great job in the chest.

Hank

Re: Blackened Trunk Handles

#19

Why did the picture fail? sometimes that happens..

Scott Burr in Ben Lomond CA

>Murphy programed the software. Epic chest you made, be very proud! That will (better be) a heirloom piece.

Now for the real poop, How did you chinch the hardware? I've never seen it done and I'd love a lesson, AKA, a tutorial.

Care to share the details?

Re: Blackened Trunk Handles

#20

chinching the hardware

Bill Tindall, E.TN

>Well, truthfully I didn't have a clue so I just tried something. I started the bend with a big screwdriver until I got a "Y". Then I positioned a piece of round bar about 1" dia in the vee fo the Y and affixed a huge C clamp to it and cranked on it. The prongs spread nicely and seated against the trunk side.

Re: Blackened Trunk Handles

#21

weird

Dan Donaldson

>Each uploaded picture gets a new name as it is transferred to the WC server. This name is related to the post number. I checked your post and the picture number is listed, but apparently it never actually uploaded as it does not exist. Never saw that before. I could make it happen by going to the picture directory and deleting the picture, but can't think of any normal process that would do that. Will have to watch to see if any more happen like that.

Re: Blackened Trunk Handles

#22

Re: weird

Pam Niedermayer, Austin, TX

>Every now and then databases take it into their heads to drop records and misbehave in other similar ways. Sometimes they're able to be shown the error of their ways during a recover, but most often they don't.

Pam

Re: Blackened Trunk Handles

#23

Re: weird

Dan Donaldson

>On top of that, the biggest problem that I have with computers is that they are too literal. They always do exactly as I tell them, not necessarily what I want ;-)

Re: Blackened Trunk Handles

#24

Re: weird

Pam Niedermayer, Austin, TX

>When a developer, I had two big problems with computers, neither of which I told them to do (although, somebody up the chain may have): weirdly rounded dollar transaction amounts due to binary to decimal conversion; and database record anomalies involving dropped records. Neither of these problems showed up on mainframes when I wrote my own database management routines, way before canned "relational" databases and micros.

Pam