Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

miter box saws

Posts

miter box saws

#1

miter box saws

Andy Lincoln,in Dearborn MI

>Hi All,

Recently I acquired a Langdon miter box and saw minus the saw handle.

Does anyone have a tracing or paper template,cad drawing etc. of what the handle should look like? I've seen a few pics on the web but it is very hard to get an idea of the correct size.I'll do some more looking and see how much info I can gather off the saw and/or box and reference some Millers Falls Catalogs.

TIA,

Andy

Re: miter box saws

#2

Disston saw?

Wiley Horne--So. Calif.

>Seems like every time I see a Langdon miter box up for auction or for sale somewhere, it has a Disston miter saw. Was Disston the original equipment on the Langdon miter?

Wiley

Re: miter box saws

#3

It just so happens.... *LINK*

Roy Anderson

>I have been through this also. I bought a Langdon Miter Box with a Disston saw. It was in great shape until UPS got ahold of it. When it arrived the handle was smashed. Smashed!

I blogged about the repair/replacement process and took a lot of photos.

See the link.


Saw handle repair

Re: miter box saws

#4

Re: miter box saws

Marv

>Hi Andy,

Millers Falls made the miter boxes and bought most of their miter saws from Disston. Other major saw makers also made miter saws. Millers Falls didn't make the saws.

You can get an estimated time period of when the saw was made from the stamping on the steel back on the blade. On the www.disstonianinstitute.com website, there is a page that has pictures of the various stampings that Disston used over the years.

Once you determine the time period of the stamping, we can also determine what the handles looked like during that same time period. If you have a Disston saw catalog, you might get a good idea of shape and size of the handles used. From what I can tell, the handles on the larger miter saws didn't change much over the years as compared to, say, the smaller dovetail and tenon backsaws.

Marv

Re: miter box saws

#5

Re: It just so happens....

Marv

>Roy,

Having made a few handles myself, I know a well made handle when I see one. You did a great job on your miter saw handle! That represents a lot of rasping and sanding.

I see you made both horns just a bit longer, I like that swept back look, and topped off with initials ta boot.

Marv

Re: miter box saws

#6

Re: It just so happens....

Andy Lincoln,in Dearborn,MI

>Roy,

That is a very nice looking replacement handle.You did an excellent job putting that saw back together.

Andy

Re: miter box saws

#7

update with pics

Andy Lincoln,in Dearborn,MI

>Hi All,

Here are a couple pics of the saw and miter box,don't know if they were married at the factory or came together later in life but I can only assume that trying to use this without a handle would lead one quickly to a p$%&r tool.

Andy

From Drop Box

From Drop Box

From Drop Box


From Drop Box

Re: miter box saws

#8

Re: update with pics

Roy Anderson

>It should not be hard to make a handle for that saw. You might have to use a little imagination to get the shape, but what the heck. Go for it.

Re: miter box saws

#9

Disstonian Institute *LINK*

Wiley Horne--So. Calif.

>Hi Andy,

You may have already visited Disstonian Institute, but just in case, I have linked to the 'Backsaw' page.

If you look at that page, and scroll down, you will find a picture of two miterbox saws, just before Eric begins showing the catalog entries. One of those two saws looks a lot like yours--for example, compare the hole pattern on the tang of the saw, as well as the profile of the lower part of the heel, where it swoops forward.

Any marks on the spine? Disstonian Inst. says that unmarked spines began appearing about 1940.

Wiley


Disstonian Institute--Backsaws

Re: miter box saws

#10

Re: Disstonian Institute

Andy Lincoln,in Dearborn MI

>Wiley ,

Thanks for the link I had kinda fogotten about D.I.

I pulled off a couple photos and traced them in CAD software and came up with a couple options.One appears more historically correct but the other is more appealing to my eye.I looked on the spine of the saw and could not see any markings whatsoever.Based on the photos and drawings it appears to be a Disston #4 like the one very near the bottom of the page,with the 4 bolts on the handle.

Here is my tracing of that handle:

From Drop Box

The handle that appeals to me asthetically is the one off the improved

backsaw #9.It may not be accurate but it certainly looks comfortable and the practice won't kill me ,nor create a shortage in my lumber pile anytime soon.

From Drop Box

As near as I can tell measuring some of the handsaws I have the opening for the hand hole is about 3 1/4" at it's longest point and this is what I scaled the drawing to.I intend to make the handle from

walnut.I think I may have to use Leif Hanson's guide to Poor Boy split nuts in order to attach the handle to the blade.

Thanks,

Andy

Re: miter box saws

#11

Re: Disstonian Institute

Wiley Horne--So. Calif.

>Andy,

No. 9 is a beautiful handle. Great choice.

Wiley