Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

shop made saw vise

Posts

shop made saw vise

#1

shop made saw vise

Roy Anderson

>I saw this on E-Bay and thought it would be easy to build. You can see it has an eccentric cam lever and a little shaft system to create closing force at the vise jaw. It looks like it is intended to be locked into a bench vise because of the long bottom tail. Any thoughts on how best to go about it? Any suggested modifications?

I've thought about building a clamp system on the back so you could clamp it directly to the bench.


img

Re: shop made saw vise

#2

Re: shop made saw vise

Joel

>IT think it's a pretty decent design. two flaws: I will ride pretty high in the vise, you will have to work standing I think and the jaws need to be longer - easy to fix.

Take a look at the sort of saw box devise that LN uses in his saw sharpening videos. the LN version is harder to build - a little, not as convincent with the cam clamp, but I think will give more pressure.