Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Building a Jack Plane - pictorial *LINK*

Posts

Re: Building a Jack Plane - pictorial *LINK*

#2

Re: Building a Jack Plane - pictorial

Bill Houghton, Sebastopol, CA

>Thanks, Derek - as always, plenty of detail and useful tips.

Re: Building a Jack Plane - pictorial *LINK*

#3

Re: Building a Jack Plane - pictorial

Tom Colligan

>Thanks so much, Derek. I don't doubt you put in some extra time in photographing the project.

What made you go with an imported wood in light of all the hardwoods you have in Australia? Thanks again, Tom.

Re: Building a Jack Plane - pictorial *LINK*

#6

Re: Building a Jack Plane - pictorial

Bruce, a MN Galoot

>That looks to be a great plane, Derek, but I'm curious about one thing. There is as much camber on your jack plane blade as I have on my #5 Stanley turned scrub plane blade. Am I missing something here?

Bruce

Re: Building a Jack Plane - pictorial *LINK*

#7

Re: Building a Jack Plane - pictorial

Derek Cohen (in Perth, Australia)

>Hi Bruce

The difference between a camber radius of 3" (typical scrub) and 8" (here) is marked when the blades are placed on top of one other, but not that large when taking a shaving.

As it turned out, a 8" radius may suit a #5 1/2 withits 2 3/8" wide blade, but this blade is only 2" wide. Consequently I reground the blade to a camber radius of 10". The shallower camber suits better.

Regards from Perth

Derek