Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Bedrock prices

Posts

Bedrock prices

#1

Bedrock prices

Victor

>What's the current market value for a user 604C?

Saw a flat top today that looked rusty but solid. Both handle & knob had been replaced with (bad) home made ones and the japaning was in rough shape, but with a clean up it could be a decent user. If it's worth it I'd drive back tomorrow and see what type it is.

Re: Bedrock prices

#3

Re: Bedrock prices

Wiley Horne--So. Calif.

>Hi Victor,

I got curious and went to check the past couple weeks completed auctions on ebay. If the plane you're talking about were in good/no apologies shape, it would have gone for $200 on ebay, give or take $25.

Suppose you were thinking about restoring it to 'no apologies' condition, cleaned up and original rosewood. An auction of 603/604 parts, including tote and knob, went off at just under $53, with 7 bids. Another parts lot (but no tote) went off at just over $50, with 10 bids. So restoring Bedrocks is something people do, and don't mind spending for parts.

So you could put an extra $50 or so into that plane to get it back right again. Or you could maybe get $50 for its metal parts. Or roll your own.......

Anyway, that's the report from completed auctions. I was impressed with the recent prices that 604's were drawing, in the middle of a depression. Also, if it was a 604-1/2 in good shape, somewhere around $270-280 is about right (based on two examples).

Interesting comparison against LN plane prices.

Wiley

Re: Bedrock prices

#4

Re: Bedrock prices

Victor

>Thanks Scott & Wiley,

I'll go back and take a closer look to make sure everything matches. The lateral adjustment level could use some straighening and other than that a good cleaning/rust removal the metal parts are okay. I'm thinking new knob/tote/blade will produce a good user. They were asking $50 for it and if I can talk them down a bit maybe it will be worth it.