Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

sack back Windsor

Posts

sack back Windsor

#1

sack back Windsor

McKay

>I took a 5 day class from Jock Jones at Snow College in Central Utah a couple of weeks ago. This is the chair. We used hand tools almost exclusively. A white oak log was shipped in from New York. We split and rived the log into the arm, bow and spindles. The white oak spindles are shaped on a shaving horse. I just finished steel wooling the last of three milk paint coats. 1st was terra, 2nd green, and the final was black. Jock was a great instructor and the time was very well spent. (my back side will never be the same after all of that time on the shaving horse.)


img

Re: sack back Windsor

#2

Nice work

Bill Houghton, Sebastopol, CA

>they are graceful looking chairs, and yours is a nice example.

Re: sack back Windsor

#3

Re: sack back Windsor

Wiley Horne--So. Calif.

>McKay,

That must have been an amazing 5 days, starting with a round oak log and ending up with assembled chairs! Are the two curved pieces, the arm and the back bow, steamed into shape? Steamed and strapped to a form?

What's your favorite spokeshave for this work? Or did it depend on roughing vs. finished cuts?

That is a very solid and handsome chair, that will be around for a long, long time. Did you mark it on the bottom?

Wiley

Re: sack back Windsor

#4

Re: sack back Windsor

McKay

>The bow and the arm are steamed for about 20 min. and then pulled, tied off and set into a small light bulb powered kiln for 3 days. The draw knife was an old one that I had and I used the veritas spoke shave for final rounding. Jock, (the instructor), used a BARR draw knife and spoke shave. Those items are now on my need vrs. want list.

Re: sack back Windsor

#5

That must've been a lot of fun.

Bruce, a MN Galoot

>Tell me, what sort of joint do you use for the legs into the seat? Straight or tapered?

Great job!

Bruce

Re: sack back Windsor

#6

Other questions about spindles & arm posts

Wiley Horne--So. Calif.

>Like Bruce, I'm interested in whether the spindles and arm posts are tapered, and also whether they go all the way through the seat, or are they set into blind holes?

The Windsor chair is such an engineering marvel, light weight, with only the spindle/post insertions to oppose the force, tied into a single unit by the arm and back hoop.

Wiley

Re: sack back Windsor

#7

Re: sack back Windsor

Tony - Memphis

>Wow, really nice!

Tony

Re: sack back Windsor

#8

Re: That must've been a lot of fun.

McKay

>It was drilled straight and then a tapered reamer was used. We would ream--check--ream --check. Real fast even for a newbie.

Re: sack back Windsor

#9

Re: Other questions about spindles & arm posts

McKay

>The seat posts, and the front three spindles were all wedged. The leg was tapered and wedged as was the bow.

Re: sack back Windsor

#10

Re: sack back Windsor

Jim Shaver - Oakville, Ont, Canada

>Beautiful work, I love these chairs, well done!

Take care,

Jim