Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Goldilocks and the three drills

Posts

Goldilocks and the three drills

#1

Goldilocks and the three drills

Bill Houghton, Sebastopol, CA

>Anyone reading what I've posted today will think I have a Goldilocks obsession. Not true, it's just been the appropriate literary reference both times.

Years ago, my uncle gave me a North Bros. breast drill with the cool five way ratchet and two speeds. Nifty, but the bit sizes for which it's optimal are easier to do with a brace and bit in wood (not necessarily so for metal, but I burn electrons for metal). That qualifies as "too big."

Fewer years ago, I found first one, then two, North Bros. No. 1530 eggbeaters with the same ratchet mechanism. The 1530 is a nifty drill, but a tad small - it tends to run out of steam at about the same size that a push drill does, and, below that, a push drill is faster. Too small.

Stopped out to a midweek yard sale today instead of doing the work I should be doing, and found the "just right" size, the 1545, about the size of a Millers-Falls No. 2. Needs a little shining up and some oil, but I'm glad I played hooky.


img