Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Lee Valley replacement blades for Stanley planes..

Posts

Lee Valley replacement blades for Stanley planes..

#1

Lee Valley replacement blades for Stanley planes..

Scott Burr in Ben Lomond CA

>Can anybody tell me if they lap the back of these blades the same way Veritas plane blades are lapped? Also how do they compare to other aftermarket blades?

Thanks!

Re: Lee Valley replacement blades for Stanley planes..

#2

Jim in Burlington Ont.

Yes they are lapped

Jim in Burlington On

>IMO that makes them the best. You can get them to work within a half hour. Quality of edge is as good as LN A2 Irons.

Re: Lee Valley replacement blades for Stanley planes..

#3

Re: Yes they are lapped

Tom MacGregor

>I recently purchased my first Lee Valley iron & found it to need the least preparation of any blade I've tried. I use the Scary Sharp system and it was flat enough out of the box to put a mirror finish on the back in record time. Installed in a V&B 907C it took the first full width .001" shaving I've gotten over 2 inches wide.

Re: Lee Valley replacement blades for Stanley planes..

#5

blades

paul womack

> You can get them to work within a half hour.

If the backs are already lapped, what the hell takes half an hour?!?

I'd have thought final back polishing would be 5 minutes, and bevel prep another 2, making a maximum of 7 minutes to "first shaving"

BugBear

Re: Lee Valley replacement blades for Stanley planes..

#6

Re: blades

ThomD

>I don't know, getting some gummy stickers off? People's desire for degree of hone can vary. Polishing for an extra 15 minutes a side wouldn't be out of place, though not something I care all that much for.

Re: Lee Valley replacement blades for Stanley planes..

#7

You forgot the 23 min...

Scott Burr in Ben Lomond CA

>It takes to enjoy a frosty cold one while preparing the blade.8^)

Re: Lee Valley replacement blades for Stanley planes..

#8

Re: You forgot the 23 min...

Marv

>Takes you 23 minutes to down a frosty cold one?....Hell, I used to down a whole sixpack in less time than that! *grin*

Re: Lee Valley replacement blades for Stanley planes..

#9

Re: You forgot the 23 min...

victor

>BBBBBBBBBBBBBBBUUUUUUUUUUUUUUUUUUUUURRRRRRRRRRPPPPPPPPPPPPPPPPPPPPPPPP!

Re: Lee Valley replacement blades for Stanley planes..

#10

In my day. After walking to work uphill all day...

Scott Burr in Ben Lomond CA

>And back again, I can see your point. As of today, 96+ here I was tempted to revert to my old ways...

Re: Lee Valley replacement blades for Stanley planes..

#11

Re: You forgot the 23 min...

Scott Burr in Ben Lomond CA

>I'll ROTFLMAO. Then again a cold one sounds like the sound of music!

Naaaaa Just sounds good.

Re: Lee Valley replacement blades for Stanley planes..

#12

Re: In my day. After walking to work uphill all da

Marv

>You are down there in the cool of the Redwoods. I'm up here where heat is hot. We'll be getting well above the hundred mark today and probably all week. The only cool frosty one I'll be consuming will be root beer. Regular beer never did quench my thirst, just made me walk and talk funny. According to a few cops, it didn't improve my driving either. Haven't indulged for over 33 years.

Marv