Anybody ever stuff a Hock or other aftermarket...
Antbody ever stuff a Hock or other aftermarket...
>Blade into a Stanley 51? OK, now now about a improved chip breaker?
My inquiry mind needs to know.
Knowledge You Can Build On — Est. 1998
Anybody ever stuff a Hock or other aftermarket...
Antbody ever stuff a Hock or other aftermarket...
>Blade into a Stanley 51? OK, now now about a improved chip breaker?
My inquiry mind needs to know.
Doh! That's my BooBoo! Hi it's my post.
Scott Burr sweating under the redwwod
>
Re: Anybody ever stuff a Hock or other aftermarket
Philip Duffy
>I did, in a 151 and needed to open the mouth so it would clear the shavings. No need to improve the chip breaker. Philip
Re: Anybody ever stuff a Hock or other aftermarket
Bill Houghton, Sebastopol, CA
>I've got the Lee Valley spokeshave iron in my No. 52. I did have to file the mouth out to fit it.
I found the mouth was tighter in the center than at the edges - I don't know if the casting had warped or if, over time, it had bent. The difference wasn't much - a few extra strokes with a fine file different.
Great tool before; greater now.
Thanks Guys...
Scott Burr sweating under the redwwod
>I totally screwed the pooch on my question. Good to know it can be done with a 151. I'm thinking of a completely different animal, about 100 down on the Stanley list...Time to repost.
Thanks!
If this is a way of doing a driveby
Bill Houghton, Sebastopol, CA
>about owning a Stanley 51, let me say in advance, you occupy a point of high vacuum.
Not really a high point of vacuum...
Scott Burr sweating under the redwwod
>I picked it up about a year ago. Broken tote, broken frog. A spent Union blade in it. Rusty with thick white paint all over it. A "real" frakenplane IMHO. I had the frog brazed back together, the body is being sandblasted this week. Now all I need is a tote and a blade.
Then I'll make a shooting board for it.
keep us posted. That's a pretty cool
Victor Parisian
>project. and yes there is a vacuum emitting from you.
Victor
We'll see Victor...
Scott Burr in Ben Lomond CA
>Good or Bad. I'll keep ya posted...