Scraper Plane Update
Tony - Memphis
>I've been getting help from George at Veritas and from Mr. Lee. Something that occurred to me was that I may have been a little shy with the burr angle. We've all been schooled so much about overdoing the burr on our card scrapers that I probably applied the same fear when I worked the burr on the scraper plane blade. I was able to make nice shavings with it in my hands, so I felt like it was sharpened at least ok. So, I went back out over the weekend and rolled the burr on over a bit, trying to make sure I got close to the 15�. That helped a lot. I'm still not 100% there, but I was able to make some nice fluffy shavings. I did notice that it works better on fairly flat stock. I needed a break and had to back to the project at hand. I'm going to work on it some more this week. I was encouraged by the results I got though. My wife came out to the shop to visit (she bought it for me for my birthday) and when I showed it to her, the piece I planed with it was glass smooth where I planed it. So, there's hope that I'll figure this thing out! If I knew how to do YouTube stuff, I'd post a video for the next person that is as slow as I am. Thanks for the help and thanks to George and Robin too. Another reason I do business with Lee Valley / Veritas is that they seem to be sincere about their customers' success with their products.
Tony



