Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

In the works...

Posts

In the works...

#1

In the works...

James Watriss

>Current project... table's almost done, top's made of a piece of brown english oak I picked up at Hearne in PA a few years ago...

The base is still under construction. I'll keep y'all posted.


img

Re: In the works...

#2

Thanks James!

Scott Burr in Ben Lomond, CA

>I love the look of that top. I can't wait to see it come together.

Are the butterflies the only thing keeping the top together?

Re: In the works...

#3

Re: Thanks James!

James Watriss

>Well, three butterflies, and whatever support it gets from the base...

Glued up the base today. Took me half a day last week to wrap my head around a three way lap joint that would lock itself together and be rigid enough to keep the table solid.


img

Re: In the works...

#4

3 Way lap jiont!?!

Scott Burr in Ben Lomond, CA

>WOOOOOHOOOOWOOOHOOKKIEE!

Three way lap joint that would lock itself together and be rigid enough to keep the table solid...

Got any pics?

I've spent days on it.

Re: In the works...

#5

Re: Thanks James!

James Watriss

>http://jameswatriss.blogspot.com/

I think in the end there were something like 8 or 10 lap joints in different directions, holding everything together.

Re: In the works...

#6

Holy Schmuckeroni!

Bruce, a MN Galoot

>I don't think I could have ever figured out that one!

bh

Re: In the works...

#7

Re: In the works...

R.J.Whelan - Sierras, California

>James ... very nice. I think Mr. Nakashima would be impressed ... rj

Re: In the works...

#8

Re: In the works...

James Watriss

>Man, I can only hope. I think I was looking through his books for a day and a half before I settled on a design...

Thanks to all for the high praise so far. Stain on the base is drying as I'm writing, and I'll be putting more varnish on the top very soon...

:-)

Re: In the works...

#9

Again James, thank you!

Scott Burr in Ben Lomond, CA

>