Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

4Th of July Dovetails

Posts

4Th of July Dovetails

#1

4Th of July Dovetails

Hank Knight

>I finally got some time in the shop over the long weekend. I spent it chopping dovetails for the drawers on my long-running hunt board project. I cut and milled the drawer parts over a month ago and they've been sitting on my bench waitring for me. At least they will be well acclimated to my shop.

Here's the result so far.

Drawers

I still have to do back and one end of the front of the top drawer and install the bottoms. But we're getting there ever so slowly. Maybe I'll get done by Christmas. If I really get on it, maybe by THIS Christmas.

Hank

Re: 4Th of July Dovetails

#2

Very nice

Bill Houghton, Sebastopol, CA

>

Re: 4Th of July Dovetails

#3

Re: 4Th of July Dovetails

wilbur

>Nice job on the dovetails, Hank!

If you want, you could go by the Greek Orthodox calendar, which would give you an extra week and a half to meet your Christmas deadline. :@)

Re: 4Th of July Dovetails

#4

Re: 4Th of July Dovetails

Wiley Horne--So. Calif.

>Hank,

Those are just beautiful! I really like the thick drawer fronts, the heavy overlap, the graduation of the drawer heights, and the corresponding graduation of the pins and tails. Nobody will mistake those for machine cut.

Beautiful work!! And design.

Wiley

Re: 4Th of July Dovetails

#5

Re: 4Th of July Dovetails

Victor Parisian

>Those are very nice. How do you make the pins so thin?

Victor

Re: 4Th of July Dovetails

#6

Nice!

Scott Burr in Ben Lomond, CA

>Did you use that radical shoot board plane on those parts?

Like my G&G kinda side board ent. center it's coming along nicely Hank!

Re: 4Th of July Dovetails

#7

Thanks, all.

Hank Knight

>Thanks, all, for the compliments. Dovetails are tedious work for me, so it's nice to get your positive feedback on my work.

Victor, the pins on the bottom drawer are what I was shooting for. The top two ended up a little heavy. I just marked them out and cut to the line.

Wilbur, thanks for the tip on the Greek Orthodox calander. I may need to get confirmed in the GO Church if I'm not done by Christmas!

Scott, yes, I used my shooting board and the Brese plane on all the drawer parts. It's REALLY nice to have everything dead square before you start cutting the joinery. Makes for an easy assembly.

Hank

Re: 4Th of July Dovetails

#8

I have found (meeting deadlines)

Bill Houghton, Sebastopol, CA

>that the important thing is never to mention the year. The astronomers tell us the sun will probably not go nova for another 4 billion years or so, so "I plan to get this done by Christmas" leaves quite a few options yet, as long as you haven't made the mistake of saying "this Christmas."

I think LOML was about three years older than the date I started the coffee table in our living room as a birthday present.