#8 Repaired
Paul Kramer
>All,
A couple of weeks ago I posted asking about a #8 lever cap. Tom MacGregor sent me a new-to-me lever and pin from a defunct 5 1/2. I finally got out to the shop to make the repair. It required the slight elongation of the slot so that it could be fully engaged. The corner was catching. A little work with the dremel and a file made for an easy fix. It works great.
I included before and after photos that are embarrassingly poorly focused. My apologies for that. My 'shop' camera isn't a very high quality machine -- but I'm allowed to have it in the shop so it is what I use.
Now for some new blades for the reconditioned Stanley planes.
Thanks yet one more time Tom,
Paul



