Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

SUCESS! Bowsaw Mark II

Posts

SUCESS! Bowsaw Mark II

#1

SUCESS! Bowsaw Mark II

Dominic in Buck's County PA

>Hi gang,

I just finished the construction of my 12" Graymercy Bowsaw kit. My first go around was,....not good. Let's face it, it was catastrophic! But I learned a lot about the importance of grain orientation, not to deviate from the plan drastically, and to go a little lighter when shaping critical areas on the arms!

This time around I paid closer attention to the orientation of the grain. The arms are flat sawn and the cross piece is quarter sawn. I also attempted to rive/split out the blanks from a huge chunk of dried out hickory. That didn't work out so well. That hickory was HARD! I ended up just matching the grain direction to the profile on the template and bandsawing out the piece.

One thing I learned on this project was how COOL card scrapers are. I always knew they were great on flat stock but a well sharpened scraper will remove rasp marks on a curved section and leave you a super smooth finish! So I spent a lot less time sanding (which is always a plus for me).

Anyway, here it is. As you can see the knobs and toggle are coccobolo, and the cross piece and arms are hickory. I plan to sign it (somewhere) and apply shellac to the components later.

Photobucket

Photobucket

Right before I took those photos I tensioned the cord until the blade was nice and tight. I then ran this saw through it's paces. I was very impressed with the way it performed. Although I need practice sawing to a line! I really liked how I could turn such a sharp radius with this saw and how rapidly I was able to remove material.

Also, you can see parts for another bowsaw in the background. Well, because of the failure I had with my Bowsaw Mark I, I made two of everything this time! I plan to order another Graymercy kit and use these "spare" parts to make a bowsaw for my friend who is helping me rebuild my lawn tractor.

See ya around,

Dominic

Re: SUCESS! Bowsaw Mark II

#2

Jesper, Denmark

Re: SUCESS! Bowsaw Mark II

Jesper, Denmark

>Congratulations, Dom. It looks very nice.

One little point: If you use some thicker cord, and particularly take a few more turns of the cord, it will be much quicker to tighten. Three or four strands on each side of the "clapper" should do it. Then you can have just one turn of the clapper to tighten or untighten the blade.

Traditionally, a hard twine of hemp or flax were used. I have never seen this offered in the USA, but it is readily available here. An alternate would be Marline, which you can get in boat supply stores, like West Marine or Jamestown Distributors.

Re: SUCESS! Bowsaw Mark II

#3

Re: SUCESS! Bowsaw Mark II

wilbur

>That looks great, Dominic! Although you could call this Bowsaw Mark I, and refer to the previous one as the beta version. :@)

Re: SUCESS! Bowsaw Mark II

#6

Re: SUCESS! Bowsaw Mark II

Bill Tindall, E.TN

>Your success is an inspiration to get on with completing my kit. You set a high bar for attractiveness.

Re: SUCESS! Bowsaw Mark II

#8

Re: SUCESS! Bowsaw Mark II

Tony - Memphis

>Wow, that's really nice. You got me thinking I need to do one! I'd like to make one of their saws too. So many projects....

Tony

Re: SUCESS! Bowsaw Mark II

#9

Re: SUCESS! Bowsaw Mark II

Dominic in Buck's County PA

>I gave the bowsaw a couple coats of garnet shellac and then signed the cross piece using a pyrography (wood burning) pen. After that I gave it a coat of Renaissance Wax.

After assembling it I couldn't resist taking it for a bit of a ride. I cut that complex "squiggle" with very little effort. Gotta' love that thin blade!

Anyway, here it is:

Photobucket

Re: SUCESS! Bowsaw Mark II

#10

Re: SUCESS! Bowsaw Mark II

Joel

>Thanks for posting the pictures, it's great to see a job well done!!!

Re: SUCESS! Bowsaw Mark II

#11

Re: SUCESS! Bowsaw Mark II

Dominic in Buck's County PA

>No problem! Thank YOU for making such a cool bowsaw kit! :>)

Re: SUCESS! Bowsaw Mark II

#12

Re: SUCESS! Bowsaw Mark II

wilbur

>That's a really nice looking cut you made. I am impressed.

Re: SUCESS! Bowsaw Mark II

#13

Re: SUCESS! Bowsaw Mark II

Bob Entwisle in NJ

>Nice work, Dom!

That is one fine looking saw.

And thanks for taking us all along for the not so smooth ride through the first �BETA Version� of the saw too.

I learned a lot from your great descriptions of the first one and all the great thoughts and information that it generated here.

And to see you put all that info back into the MARK II is excellent!

Thanks

Bob

Re: SUCESS! Bowsaw Mark II

#14

strength

paul womack

>Nice lookin' saw!

and the cross piece is quarter sawn.

I wouldn't worry too much about the cross piece - it's under pure compression, and most anything will work; I don't ever remember seeing a broken bow-saw cross piece.

BugBear

Re: SUCESS! Bowsaw Mark II

#15

You did good Dom!

Scott Burr in Ben Lomond, CA

>Nice looking saw. Way better than the first one...8^)

Got one (or 2) of those on my to do list as well.