Exploring a 19th century tool chest, questions
Bill Tindall, E.TN
>I was to meet a realitor at her house last night. I spied a set of chairs with exquisite carving. The lady said a relative had made them who had been a cabinet maker in NYC in the 1800's. She also said she was "keeper of his tool chest" which she proceeded to show me. It was typical sized. The center was open to the bottom. Each side had trays which slid to the center revealing the tray beneath. The trays extended part way to the bottom; the bottom was all open. In the bottom-back was a row of about 20 profiled planes, with few hollows or rounds. I saw three planes- a short one, a medium one and a long one. The short one had been fitted with a steel sole. The others had mouth inserts of some dark dense looking wood. There were numerous scraper profiles, and screw clamps of various sizes disassembled so that they fit in the trunk. There was a handle with a polished agate piece affixed to its end which I believe was used to "hammer" veneer. I saw one dovetail saw and didn't get to explore saws buried under stuff toward the front of the trunk. There were numerous carving tools. I did not see chisels, but I didn't get to explore everything as she was getting antsy to make a commision (she didn't). I have never seen a farm with poorer dirt. The woodland which "hadn't been logged since 1970" had 5" trees and lots of rotting stumps. But that is another story.
Which leads to questions: I didn't see that any care had been taken to preserve these tools, such as "oiling" the steel or loosening the plane wedges. What should be done to preserve these tools? Would there be an academic interest in an inventory of these tools?



