Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

HT use for BIG Wood Chipper blades?

Posts

HT use for BIG Wood Chipper blades?

#1

Dominic in Bucks County PA

HT use for BIG Wood Chipper blades?

Dominic in Bucks County PA

>Hi Gang,

My buddy is refurbing a BIG V-8 powered wood chipper. He bought this thing from Craigs list knowing that the previous owner had forgot to tighten one of the blade "wedges" (that clamp it in place). The head that held the blades looks amazing like a head from an ENOURMOUS Wood Jointer. I saw the remains of one blade and was amazed the the previous owner escaped unscathed. Talk about shrapnel!

Anyway, my buddy now has a couple 3" wide x 1/4" (or 5/16")thk x 16" long steel blades. I was wondering what we could make out of these thngs. Besides a nice heavy wood turning scraper, that is. I'd LOVE to make a plane iron or something else out of this stuff. :>)

I'm not sure what kind of steel these blades are made from. I do know that it's hard as hell and took a "shaving" out of a iron wedge (yes, like it was made of WOOD) when my buddy was dissambling the chipper. A close look with a high powered magnifying glass leads me to believe that these blades are not case hardened, but have a uniform structure thoughout.

So I'm wondering how I could cut this stuff up. What method would allow me to cut it to useable size? I'm thinking that an abrasive cut off wheel would work. But I'm concerned that it would overheat the steel. Any thoughts on this?

See ya around,

Dominic

Re: HT use for BIG Wood Chipper blades?

#2

Re: HT use for BIG Wood Chipper blades?

victor

>paper weight/door stop. :>)

Ive got a similar piece about 4 feet long and 3/4 inch thick that I am saving for some reason. came from the leading edge of a bulldozer loader bucket. Hard as hell and heavy.

Good luck with it

Victor

Re: HT use for BIG Wood Chipper blades?

#3

Re: HT use for BIG Wood Chipper blades?

ThomD

>You could write these guys to see what it is made out of:

http://www.zenithcutter.com/products/treeCare/

It is presumably either some plain carbon steel, or a high speed steel. I am thinking it might be 51200 ish stuff given how they heat treat it.

Basically it doesn't mater, the only practical way to cut HT steel is to gind it. You need either a disc grinder, or the blade that mounts on a saw. I would prefer the disc grinder, because I don't like to think of kickback on a 16" blade. You can pick one up for 50 bucks at harbour freight etc...

The issue is whether grinding off a piece will draw the temper. If you don't have the means of HTing it yourself, then you either have to proceed very slowly, or you could try a test. Gind off a small chunk and see whether the hardness changes. Heat it to orange in a propane torch, and bury it in ash, a leave it there overnight, if it is still hard to file then it is HSS, and you can grind it as agressively as you wish, and it will retain hardness. If it looses it's temper then you need to grind it very slowly to preserve hardness.

To test for hardness you can file different parts of the blade. You can also dry grind it and see if the sparks are as profuse from the back of the blade as the edge, this will indicate if it is high carbon through and through. The file will tell you if the temper if pretty even.

The shape is a bit of a challenge since from the sound of it cutting off a slice will yield blades 3" long which is shortish. Unless you want 3" wide blades and can cut from the other angle which may not be as grain aligned. I would consider this steel for a beam plane or inverted stationary plane for coopering, or some kind of guillotine for trim work.

Re: HT use for BIG Wood Chipper blades?

#4

Re: HT use for BIG Wood Chipper blades?

Alan DuBoff

>Dom,

They make excellent drawknives.

There was a guy up in Montana that used to make drawknives out of chipper blades for many of the log craftsmen.

I was using one of his bars a couple weeks ago, look like he welded handles on the ends and put some big rubber grips over them.

Chippers are mean machines, they'll turn a tree into mulch in a matter of minutes...

Regards,

Alan

Regards,

Alan

Re: HT use for BIG Wood Chipper blades?

#5

Dominic in Bucks County PA

Draw knife!

Dominic in Bucks County PA

>Alan,

A DRAWKINFE! That's a great idea! Thanks for the inspiration!

And yeah, this is a monster of a chipper. I mean, it's powered by a Ford V8 Engine!

See ya around,

Dominic

Re: HT use for BIG Wood Chipper blades?

#7

Re: Draw knife!

Alan DuBoff

>Dom,

Here's one made out of a chipper blade I was using a couple weeks ago. Let me tell you, drawknifin' can be tough work. One really needs to pull with their body, not their arms...

Regards,

Alan


img

Re: HT use for BIG Wood Chipper blades?

#8

Hey Alan!

Wiley Horne--So. Calif.

>Can you tell us about your big home construction project? Looks like big progress is being made!

Wiley

Re: HT use for BIG Wood Chipper blades?

#9

Re: HT use for BIG Wood Chipper blades?

William Haun, Iowa

>I worked summers at a sawmill in Wisconsin. They had the usually sawmill production equipment. 150 hp electric motor for the head saw, 100 hp bull edger, 5' diameter chipper to allow the clean waste to be sent to a power plant to be burnt as fuel (green even in 1978).

Well this chipper could take a 7x9 white oak railroad tie and self-feed it and turn it into chips. When you turned it off, it would take ~15 minutes to spin down, but it could be stopped faster by putting a 4x4 against the pulley and leveraging on it. The knives in this machine were changed in the morning and at noon.

One day, we were powering up after lunch. There was a sequence of starting these motors so as to not brown out the lines or peak the amp meter which would cause the mill to use the highest electric rate for that month. The head saw was started, bull edger, chipper, trim saws, compressor and away the head sawyer (my uncle) went. Soon they realized no one turned on the shaker table which fed the chipper. So that switch was thrown. Immediately all heck broke loss! People dove for cover as this chipper attempted to take itself out of its concrete footings. After what seemed an eternity, someone was able to throw the main breaker and shut everything down. But it still took minutes for this chipper to stop thrashing.

Fortunatly, the chipper was in its own added-on room to the sawmill and no one was inside when this happened. The room had a line of chipped out concrete floor and holes up the walls and through the ceiling. The 1/4" steel shell of the chipper was obliterated and it had pulled some of the bolts that held it to the floor out. This all because the maintainence man had placed the old set of knives on the shaker table and had forgot to pick them up.

So, no one had a chance to make anything out of either set of knives, because they were all chips.

Re: HT use for BIG Wood Chipper blades?

#10

Re: Hey Alan!

Alan DuBoff

>I'll start another thread for it, it hasn't progressed in a couple weeks as I am back in Cali now.

Cheers,

Alan

Re: HT use for BIG Wood Chipper blades?

#11

Draw knifing as aerobic exercise

Bill Houghton, Sebastopol, CA

>I find myself when hogging off stock actually making that kind of visceral grunt that the movies always have karate folks making.