Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Making Infill Dovetails

Posts

Making Infill Dovetails

#1

Making Infill Dovetails

Tom MacGregor

>I got hold of an unassembled #7 Shepard infill kit with damaged wood at an attractive price and have started making my first plane. I think it's going to work OK, but may have a few "first try" blemishes. I read & looked at images of everything I could find before I started filing, but it it seemed like I had to remove a lot of metal before I got the sides & sole to mesh to start peening. Does anyone know of a video or series of images that show the filing and fitting process more clearly than most?

Re: Making Infill Dovetails

#2

Dominic in Bucks County PA

Check this out

Dominic in Bucks County PA

>Tom,

There was a very interesting thread over on WoodNet about this.

Here's the link:

Making a Small (first) Infill

There were links embedded in the thread that lead you to several makers of infills personal web sites. On those web sites there were some great "how to" articles.

See ya around,

Dominic

Re: Making Infill Dovetails

#3

Re: Making Infill Dovetails  *LINK*

Derek Cohen (in Perth, Australia)

>Hi Tom

One of the great and largely unheralded infill plane makers is Peter McBride (of Australia!). An all round nice guy. Below is a link to an article on his website. Look around his website for some outstanding planes that he has built and some outstanding planes that he has collected.


Regards from Perth

Derek


Making a dovetailed bench rebate infill plane

Re: Making Infill Dovetails

#4

Re: Making Infill Dovetails

William Haun, Iowa

>I have the Shepherd Tool Company Inc. kit instructions for the Spiers-Style NO 7 Parallel Smoother (Steel, Dovetailed) in PDF format. I could email this to you if you wish.

I also downloaded their instructional videos and I have them also. I have a series of six (6) of their videos that total about 80 mbytes. Could be to much to email to you, but if I knew how and where, I could put them out there some place. Actually, these still may be out on the web someplace.

Re: Making Infill Dovetails

#5

Re: Making Infill Dovetails

Pam Niedermayer, Austin, TX

>I'd love to see the videos and have searched via Wayback and YouTube with no luck. I've got a fast connection. Oh, yeah, and I have a just started Shepherd plane, not sure of its number.

Pam