Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Frog Adjusting Screw

Posts

Frog Adjusting Screw

#1

Frog Adjusting Screw

Dave (Arlington, VA)

>Hi -

I scored a nice Union 5 1/2 user today that was complete and in pretty good shape except for that the Frog Adjusting Screw (and the two other pieces that go with it) was missing.

If I intend to set this plane for moderately coarse cuts and leave it that way (I have another 5 1/2), is there any problems I might encounter or cause from using a plane that is missing these pieces. Only paid $10 for it.

Thanks in advance.

Regards -

Dave

Re: Frog Adjusting Screw

#2

Re: Frog Adjusting Screw

David Miller from Iowa

>If you can manually set the blade and lock it tight it will work fine

Re: Frog Adjusting Screw

#3

Re: Frog Adjusting Screw

Joe Rogers, Northern Virginia

>Hey Dave. Good score. I don't think you will have any problems using the plane with out the parts. I find them useful in "sneaking up on" the adjustment. If you can get what you want eventually you are good to go. Remember not all adjustable frog planes had the adjuster parts. I have a Sargent that is manufactured sans adjuster screw and it just takes longer to get the mouth setting I'm looking for.

That said if I found some parts available for the plane I'd grab them and install them. But that's just me. :-)

JR

Re: Frog Adjusting Screw

#4

Thanks, David and Joe

Dave (Arlington, VA)

>I very much appreciate your advice. David, yes, I can set and lock the frog down manually. And, Joe, yes, if I did stumble across the parts I probably would pick them up.... but I no idea what size threads I'm dealing with here. So unless I happened across another (very cheap!) Union I'd probably not take the chance.

Again, many thanks.

Dave