Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Chariot Scraper Plane *LINK*

Posts

Chariot Scraper Plane *LINK*

#1

scott grandstaff

Chariot Scraper Plane *LINK*

Scott Grandstaff

>I guess this one was slow in coming. Seemed like I was going to get time to finish up, but the time kept slipping away.

So anyway, this just in. Only one if its kind there ever was.

Vest pocket adjustable chariot scraper plane.

Hope the links work

yours Scott


img

Chariot Scraper Plane

Re: Chariot Scraper Plane *LINK*

#2

Re: Chariot Scraper Plane

Wiley Horne--So. Calif.

>Scott,

That is truly fabulous!! It's beautiful to look at, but the design is more beautiful yet. Let me check one thing about the blade clamping mechanism: The front "strap" which wraps around the forward blade jaw--does it rotate on pins to allow the jaws to close on the blade?

The angle adjust mechanism is most clever and elegant. Very similar to Paul Hamler's, and looks to be far faster than the complex and fiddly Stanley mechanism (as on the 212).

Magnificently designed and executed!! How does it work?

Thanks for showing,

Wiley

Re: Chariot Scraper Plane *LINK*

#3

Re: Chariot Scraper Plane

Rob Lee

>Very nicely done!

Cheers -

Rob

(3 week vaction starts today!)

Re: Chariot Scraper Plane *LINK*

#4

scott grandstaff

Re: Chariot Scraper Plane

Scott Grandstaff

>Thank you very much for the kind thoughts Wiley!!

Lets see, the lever cap is a wrap around. The bar is round in the back and only flat on the back where it attaches to the cap. So it easily slips on and off and pivots when you tighten the screw.

You would think you could just bend a brass bar and attach it to the cap? But it wouldn't work that way. I tried it a couple times before giving up (kept breaking trying to bend so tight). It had to be notched and folded and hard soldered that way. Jewelers hard silver solder is wonderful! I am just getting into it after all this time, but its like a miracle.

The blade is a thin piece of .025 spring steel and works so easy its criminal.

Oh, Pauls' spring idea beats double nuts hands down, as you get much finer, and instant adjustment for that just right cut, with only a fingertip as you work.

The lever cap screw is stuffed with local abalone from around Eureka area. The color is gorgeous but they are kind of small shells, not like the big ones from further down the coast. Can't beat the price though.

You noticed the scale? The thumbnail giveaway? :-)

It was once a Stanley 101. So its about 3" all in.

yours Scott

Re: Chariot Scraper Plane *LINK*

#5

scott grandstaff

Re: Chariot Scraper Plane

Scott Grandstaff

>Thanks much!!

3 weeks?? hoo hohooooo!! Way to go Rob!

What you got on your, sure to be fevered mind??

yours Scott

Re: Chariot Scraper Plane *LINK*

#6

Re: Chariot Scraper Plane

Rob Lee

>Hi -

Driving to the Ozarks, and then - who knows?

We like small towns, and dorky attractions. Gonna catch a baseball game somewhere, watch Mississippi riverboats....that sorta thing...

Gonna read some books too... listen to music, and go hiking. Only wood and tools I'll have contact with are an axe, and firewood...

Chris S tells me I don't have to paint-out any teeth, or wear overalls... just call everyone "cuz"....

:)

Cheers -

Billy-Rob

Re: Chariot Scraper Plane *LINK*

#7

Hey, Rob

Ron Bauman

>If your going along the Mississippi don't miss a tow boat taking a long string of barges through one of the many locks. They've got a donkey engine at one end that pulls the string through, it's neat if you like that sorta thing. Usually comes with attendant coots.

Re: Chariot Scraper Plane *LINK*

#8

Clever use for a 101

Bill Houghton, Sebastopol, CA

>I thought that little finger rest on the front looked familiar (well, I confess I also thought, "Dang, Scott made a nice pattern for that casting").

Re: Chariot Scraper Plane *LINK*

#9

Re: Chariot Scraper Plane

ThomD

>Sure, as long as you as good looking as Clinton, you will fit right in. Take your smallmouth flyrod, and trout rod the rivers are beautiful.

Re: Chariot Scraper Plane *LINK*

#10

Re: Clever use for a 101

Derek Cohen (in Perth, Australia)

>Hi Scott

That is terrific -- quite up to your ususal standard ... and another "miniture" in an increasing line of miniture planes.

Did you consider adding an infill to disguide that #101 finger grip?

Regards from Perth (holidaying in Cape Town)

Derek

Re: Chariot Scraper Plane *LINK*

#11

scott grandstaff

Re: Clever use for a 101

Scott Grandstaff

>I could have milled off the finger rest easy enough, but I like it! :-) Besides, I already did a 101 infill. Couple of them actually.

yours Scott


img

Re: Chariot Scraper Plane *LINK*

#12

Re: Clever use for a 101

Tony Zaffuto

>So this explains the near absence of 101s on the 'bay, and the high price they bring if you do come across one!

Beautiful work Scott!

T.Z.

Re: Chariot Scraper Plane *LINK*

#13

Memphis

Tony - Memphis

>Hey Rob, be careful calling folks 'round here "cuz" with that funny accent of yours! If you are in the area and need help or advice on where to eat and/or perhaps the company of a stranger (although a loyal customer), let me know. I'm in Bartlett (burb of Memphis). Enjoy your trip. Somebody has already turned up the heat here. We're about 8� above normal (lower 90's for highs).

Tony

Re: Chariot Scraper Plane *LINK*

#14

Re: Memphis

Christopher Fitch @ Memphis

>Yes it's warming up around here now...

If you want to chat, drop me a line too Rob.

;)

Re: Chariot Scraper Plane *LINK*

#15

I missed this one Scott, Fantastic!

Scott Burr in Ben Lomond, CA

>

Re: Chariot Scraper Plane *LINK*

#16

SWEET! 'nother fine one Scott!

Scott Burr in Ben Lomond, CA

>Let's see we have 101 rabbit planes, infill smoothers and now scrapers. What's next!?!

Love the blade locking knob.

How did you do the sides?

Re: Chariot Scraper Plane *LINK*

#17

scott grandstaff

Re: SWEET! 'nother fine one Scott! *LINK*

Scott Grandstaff

>How did you do the sides?

Thanks Scott

Well, you know, there's the easy way, and then there's what I have to do. heehehe

I used a file of course, or several files actually.

There was a guy around december who secured a stash of new old stock, large american made files (probably made in the 50-60's from the boxes/logos) and sold them on ebay...... cheap.

They went fast too.

The guy thought he had a lot, and put them up BIN with very fair shipping, and they flat vanished! (bet he was shocked)

I used the occasion for my Christmas present.

Kitty and I buy our own Christmas presents and then wrap up and don't show the other person. Unwrapping as per usual.

Some surprise is still in the air, everyone gets what they really want, and nobody ever has to hunt down a return receipt.

So, if you have a selection of sizes of good sharp files......

(new production is dreck btw, I tried a couple. No patch on the old tooth angles. They make them so idiot proof now that they don't really cut at all. On the old files, its possible to break teeth if you don't have any brains. The new files will never chip, but then you aren't cutting much of anything with them either.

The old pattern will flat hog some metal, enough to shock you!)

Its not so bad at all to get a good radius of your chosen curve, when you have a generous arsenal of weapons. :-)

yours Scott


img

filebag

Re: Chariot Scraper Plane *LINK*

#18

Very clever file storage

Bill Houghton, Sebastopol, CA

>

Re: Chariot Scraper Plane *LINK*

#19

scott grandstaff

Re: Very clever file storage

Scott Grandstaff

>Thnx Bill

It uses up wasted space and I need to use all the wasted space I can find!!

Plus, its such an easy project and helps gives me excuse to get and use vintage sewing machines ......

Oops, I said machine-s- didn't I?

heh hehehehehehe

yours Scott

Re: Chariot Scraper Plane *LINK*

#20

If they're treadle machines, I guess they're

Bill Houghton, Sebastopol, CA

>borderline OK.

But, of course, most of this forum uses WW machines with some regularity. And this here thingie I'm making letters on a TV screen with is sure machinelike.