Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

*** IDES OF MAY: Sam Maloof ***

Posts

*** IDES OF MAY: Sam Maloof ***

#1

Ellis Walentine

*** IDES OF MAY: Sam Maloof ***

Ellis Walentine

>

My friend Ron Goldman, editor of Woodworker West, has already broken the ice on this survey on our "Messages" board -- tributes to Sam Maloof -- and some of you have already added your sentiments here. I would like to add my thoughts and solicit more of yours, on this man and his legacy. If you knew Sam or visited his house or sat in one of his rockers, you no doubt came away with some sense of his unique and wonderful gift. If you only ever saw pictures or knockoffs of his work, you must have been struck by his lyrical and organic style, so totally removed from the rectilinear regularity that seems inherent in the machine woodworking process. If you've never wielded spokeshave or rasp, you had to wonder how he managed to produce those sinuous, smoothly flowing surfaces, with their pleasing proportions, their superbly tactile feel and their visual poetry. As you can tell, like many other woodworkers of my generation, I have been inspired and informed by this man, his attitude, his work ethic, his indefatigable optimism and the unsurpassed skills that are so strongly evidenced by the work he produced over his long career.

As Ron mentioned, we will devote our next "News & Views" column to your impressions, remembrances and tributes to Sam Maloof -- the man and the impact, if any, that he had on your own woodworking development. If you have not already done so below, please add your voice to this tribute.

Thanks,

Ellis




img

Re: *** IDES OF MAY: Sam Maloof ***

#2

Re: *** IDES OF MAY: Sam Maloof ***

Wiley Horne--So. Calif.

>Ellis and all,

Sam lived not far up the highway from me. Several years ago, he offered all-day seminars at his home, and my wife as a birthday gift bought me admission to one. Incidentally, he was doing these seminars as part of a negotiated settlement with the authorities to allow him to keep his home and compound intact; otherwise, they were going to make him move at an advanced age, due to nonconforming landuse or somesuch. It wasn't all glamour in the Maloof's lives.

Sam Maloof was a working person, not a brand. He had a team of a few woodworkers at that time, but he was still in the thick of the work, and was 79 years old. He was preparing for a show at the Smithsonian, to take place in the year of his 80th birthday. He didn't have an art school/design school background; he was a heads-down woodworker who had made it through talent and hard work.

He was very proud of his wood supply, which was housed in two large sheds. He showed our small group of 8 or 10 his stash. There was a huge amount of instrument grade wood there, and from his comments it was clear that lining up wood and maintaining constant contact with suppliers was a foremost activity of his. He was getting a lot of money for his furniture, but he was also buying super premium grade wood, and there were no special deals in this grade wood, so his costs were high.

Sam's work area was eclectic. There was a handtools bench area, with many tools arrayed on the walls. But many of these were given him by vendors to try out, and it's not where his heart really was. He was very proud of a large European bandsaw that had been given him, in appreciation for some good deed he had done for someone. He had an comparably large table saw, 12" at least, with Forrest blade in it.

Everything there on his property seemed organic to his life. He had added onto his home a few times, and it had taken on a hand-made feel to it, with a number of interesting features that he had made. There was an impressively large door or double-door, and he particularly liked the handmade latch he had fashioned for it. In everything he showed us, his presentation would soon fix on a significant detail, and he would describe at length how and why he had done that detail in that way. He did not seem to be a big picture guy, but was rather into the key details that made a piece work, or not.

Problem solving was ever-present: He was describing the difficulties in getting a particular router or shaper bit made, and one of the guys in our seminar gave him a lead on who could do that work, and Sam stopped everything to take down the contact info. There seemed to be no idleness or waste motion in his life (other than these seminars that he had to do)--every action and activity went straight to the bottom line of a project he was working on, something that needed doing.

One of the things that struck me the most was Sam's use of machine tools. He used them like hand tools. A key part of the daylong seminar was his description of making a rocking chair. He showed us the forms he used to laminate the rockers onto. He discussed the different shapes and forms of the finials on the uprights, and how they influenced the look of the chair. And then he began making one of the arms, right in front us. We were seated or standing around the shop floor, wherever we could find a place to keep him in view. And he moved around as necessary to make this arm. He started with what looked like a 4" x 3" blank of walnut, which was a typical chair material. He had predrawn his contour lines on the faces of this blank. He first walked over to that huge bandsaw, which looked like it had a 1-1/2" band in it. He shaped that arm down close to his template lines right from the saw. His arms were just flying on either side of the blade, as he made pass after pass. I don't think his nose was ever more than 6" from the blade. Somewhere in the middle of that demo, he advised us not to do it that way ourselves! Toward the end he was taking off the finest shavings on that big bandsaw, working right up to his lines. This was all freehand on the saw, and I don't remember him taking a shave or rasp to it afterward--if he did it was very brief. Then he walked back towards us, still talking--he was talking through all of this activity. He picked up a 3HP Speedmatic router with a D-handle on it. There on the shop floor, he continued his lecture to us, but I never heard a word of it, because I was transfixed watching him hold that shaped blank in his left hand, and the router in his right hand. He had a roundover bit in the router. And as he talked, he used that screaming router one-handed to trace every line and curve on that arm. He was twisting the arm around, so he could get at it from every angle, and the router was being used like a shave in the other hand. He didn't seem old, even at 79. He was very vigorous, didn't seem to have an age. He had a short-sleeve shirt on, and his forearms were like Popeye's, except that they seemed to be made of inch-thick braided cable twisted together.

This was a simple yet memorable man, whose life was focussed, unembellished, and all of a piece. He made each piece of furniture from one single type of wood, also.

Wiley

Re: *** IDES OF MAY: Sam Maloof ***

#3

Re: *** IDES OF MAY: Sam Maloof ***

ThomD

>That's a great recollection Wiley. That thing about his property dragged on for decades. I had not heard that there was a settlement that required him to do comunity service, which is something of a disgrace it would seem to me, if a boon for you and apparently of use to him.

Re: *** IDES OF MAY: Sam Maloof ***

#4

Sam Maloof

David Miller from Iowa

>Never met the man, but I enjoyed his work through FWW, PBS and other venues. My take away is that he was a true artist, just happened to use wood.

I generally don't use plans and enjoy the design more than the manufacture. I aspire to be a 1/4 the craftsman Sam was.

Re: *** IDES OF MAY: Sam Maloof ***

#5

Re: Sam Maloof

Bill Houghton, Sebastopol, CA

>The obit in our local paper today (I could get a little miffed that it took them three days...) referred to his making furniture "with no metal fastenings." I recall, when FWW was featuring his work in the early black-and-white years, that his decision to use sheet metal screws to fasten the legs to the seats with his signature joint caused some controversy. Did he change his approach later?

Re: *** IDES OF MAY: Sam Maloof ***

#6

Pure Genius and Inspitarional

roninkokomo

>He was truly amazing. He had a way about him that made students think that they could do it too.

Incredible amount of work in his lifetime.

Re: *** IDES OF MAY: Sam Maloof ***

#7

Re: Sam Maloof

ThomD

>No change in the screws, As far as I know, that was his method, and while it worked out aesthetically on his chairs, if you have ever seen his casework, it was a lot less successfull with all the rows of plugs, and the less organic shapes.

I suspect the people who wrote what you read are at a minimal level of sophistication. I can remember when I first learned that one could glue wood together with the effect of greater strength than the surrounding wood, and how impressed I was. Following on that the idea one could deploy joinery that was more effective than fasteners, etc... how impressive that was to me. When one sticks with it a while, what joints are used where becomes a bigger deal, and even a mater of expression. But to the beginer the fact he glued up his seat blanks would be a mystery.

Of course his joints, as you know, were partly joinery, and partly hardware. He developed a clever way of routing an engagement between the legs and the seat using a roundover bit, and a rebating bit, with BB guides.

Re: *** IDES OF MAY: Sam Maloof ***

#8

My chance to meet Sam

Paul M. in San Diego

>I only met Sam once, at a Kezurou-Kai competition that was held at Palomar College back in 2004. We built a Tory gate on the campus (out of Torrey Pine, appropriately). Sam was there for the fun of the festivities and also to be presented with an award from the school. Dick (I forget his last name!) who is a bronze craftsman created a casting from Sam's hands of him holding a rasp and forming the arm of one of his famous chairs. Dick is in the red head-band in the photo. The other presenter is Russ Filbeck, noted chair maker and instructor at the college.

It was great to get a chance to meet him. He was willing to chat with all attendees and there were none of the "airs" of greatness that you would expect from such a legend.

You can see in the attached photo that his hands were bandaged from a tool accident in his shop.


img

Re: *** IDES OF MAY: Sam Maloof ***

#9

Re: My chance to meet Sam pt2

Paul M. in San Diego

>Another fun photo of Sam from this event. A Japanese smith made some shuriken (throwing stars), and set up a target. Seeing a western legend dressed in Japanese clothes throwing ninja weapons was too much to pass up without a photo:


img