Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

cross cut sawing harwood planks

Posts

cross cut sawing harwood planks

#1

cross cut sawing harwood planks

Bill Tindall, E.TN

>I don't need to do this operation enough to keep a chop saw set up and if the cut is on the end of something long it is too difficult to position the plank on the table saw. A typical hand saw is too slow for my level of patience.

I saw smaller fire wood with this kind of saw and I keep one very sharp and with a minimal set for dry wood. It happened to be in reach when the need arose to break down several 8/4 cherry planks into manageable lengths. It worked great for the task at hand, cutting rapidly and straight. These saws are readily available for $20-30. Get one with the 4 cutters and a raker tooth pattern for fast cutting. This pattern is easy to file and set.

Put a child on the other end and it is an opportunity to do something useful with them- making firewood. I have fond memories of sawing with my grandfather, which I suppose is why I have 4 of these saws tuned for various tasks.


img

Re: cross cut sawing harwood planks

#2

Re: cross cut sawing harwood planks

Dave Anderson NH

>Hi Bill,

I often use a bowsaw with a 3 tpi blade for trimming tree branches around the yard and for cutting firewood on occasion. It's a lot faster and safer than going up in a tree with a chain saw for anything under about 3-4" diamater. During last winter's ice storm I took down a couple of white birches that were bent over the electric, phone, and cable wires with the bowsaw. They were only about 5-6" diameter and since birch is soft, it only took less than a minute each to cut through them.