Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Protractor . . .

Posts

Protractor . . .

#1

Protractor . . .

steve mackay

>In your years did you ever find a protractor, other than this style, that worked on small applications ? I DO have three sizes of sliding bevel squares ( two LVs & a Stanley )but I like seeing the value of the angle while I mark it. These are just kind of sloppy. Of course, like my favorite calipers, I wish it would lock somehow also. I know I'm asking for something they never made but I can always wish right ?


img

Re: Protractor . . .

#2

would this help? *LINK*

Larry Williams

>We often use a universal bevel protractor. Here's an inexpensive one you might find useful but the really good ones are a lot more expensive.


universal bevel protractor

Re: Protractor . . .

#3

Lee Valley *LINK*

Greg B�tit, Crown Point, NY

>I've had this one for a while, and use it a lot.


Lee Valley "toolbox" protractor

Re: Protractor . . .

#4

Re: would this help?

steve mackay

>Pretty big (12"). I keep look'n on Da'Bay think'n, maybe, Lufkin made a 6" model like that one. So far, no dice.

Re: Protractor . . .

#5

Re: would this help?

Larry Williams

>The ones we use have both a 6" and 12" blade and they're pretty accurate to 1 1/12�. Starrett and Mitutoyo both make similar models for quite a bit more than the $50 or $60 we paid for those we use.

Re: Protractor . . .

#6

Re: would this help? *LINK*

Victor Parisian

>I just googled General Tools Protactor and found this. American Eagle Products.

vic


link to picture

Re: Protractor . . .

#7

here is the link to the site.  *LINK*

Victor Parisian

>


The site...

Re: Protractor . . .

#8

Re: Protractor . . . *LINK*

Bill Houghton, Sebastopol, CA

>I often use a machinist's protractor head (center attachment in the pic at the link below) for a combo square to set the angle, then take it off with a sliding bevel. Extra steps, more precision, less awkward than the whole protractor.


Example from Starrett

Re: Protractor . . .

#9

Re: would this help? *LINK*

MikeW

>I have a Fowler--still spendy but not as much as other top names.

The Enco link is to s similar one as Larry linked to. Same price. A little more flexible with the 6" ruler included.

Mike


Link to Enco

Re: Protractor . . .

#10

Re: Protractor . . .

Derek Cohen (in Perth, Australia)

>I tend to keep an eye out for these things because I also find my Starrett protractor (part of the 12" combination square set) too large or clumsy for smaller applications.

I have one like yours as well. Vintage again (= cheap) and my mind is blank as to the maker's name ... Moore and Wright ... Browne and Sharp? My eyesight is not what it used to be and the markings are difficult to read, and the damn thing tends to slip a little. Surfing eBay, I came across one made by Bridge City that was better designed, but at a price of course .. I passed on that one.

Sometimes I just use a simple plastic school protractor, one of those cheap semi-circle affairs. No picture, but I think you know since they are so common. I'm surprised no one has mentioned it before.

The other one I have is a drafting adjustable square. These have a built-in protractor. Again clear plastic and generally cheap on eBay.

Regards from Perth

Derek

Re: Protractor . . .

#11

Re: Protractor . . . *LINK*

Rob Lee

>Steve -

The one in the link below is the one I use most frequently...

Affordable, American made, and accurate to at least 1/2 degree.

Conceptually, a small protractor is attractive - but you really need a large head to set the device accurately - and this plastic gauge is just the ticket. The only drawback to it - the arms are in different planes - so they can cross each other...perfect for marking a board, as one arm becomes a fence.... bot not so great when drawing, and you want both arms flat on a surface....

Cheers -

Rob


Protractor

Re: Protractor . . .

#12

Starrett

roninkokomo

>I don't use mine very often, but it sure does what you are asking

Re: Protractor . . .

#13

Re: Protractor . . .

Marv....... Northern California Lake Co.

>Hi Rob,

I have gotten to think of you as "the King of tools". I love thumbing through your great catalog. I keep it in the bathroom so while on the "throne" I have plenty of time to read all the verbage and marvel over all the full color pictures.

Great catalog, products too.

Marv

Re: Protractor . . .

#14

Re: Protractor . . .

ThomD

>For one that locks and has marked gradations I use the Starret one LV sells.

For accurate stuff I often just lay it out with trig. So if one wants a 45 degree bevel on a given piece I would come across the width of the stock, and use a dial caliper for that measurement. Trig calcs are fine with a scientific calculator, every computer has one. But as often as not these days I just draw it out in CAD. Not a huge drawing, just a diagonal line in an appropriate box. Then I can print it out and transfer the ink to metal or wood, or have the measurements. CAD is good because it is pretty much impossible to get turned around. Kinda thing that might help laying out some weird angles.

Some years back LV was selling a large scale version of the Starret, about 3 feet on the arm or something. It was a little expensive, but I often wish I had got it. Not sure who sells it today.

Re: Protractor . . .

#15

Re: Lee Valley

Paul M.

>I have this Lee Valley one, and found it very difficult to use to get low angles (I wanted 15 degrees on one project). I'm not impressed. The large thickness of the arms made marking one line while referencing another line very error prone.

The General style or the others posted above is better than this. A thin metal protractor is better than a fat plastic one.