Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Vertitas Large Spokeshave? *LINK*

Posts

Vertitas Large Spokeshave? *LINK*

#1

JL

Vertitas Large Spokeshave? *LINK*

JL

>I have a set of the Lee Valley Spokeshaves that I use quite frequently to shave spindles and hoops (as well as other things). I got the Lee Valley catalog recently and I saw this LARGE Spokeshave.

I do mostly chairs and other pieces of furniture. Would this tool be something to put on my "Wish List"? Do ya'll think it would be a valuable addition?

I do have a variety of small planes. I also have a Stanley #80 cabinet scraper.


Veritas Large Spokeshave

Re: Vertitas Large Spokeshave? *LINK*

#2

Re: Vertitas Large Spokeshave?

Patrick Gibbons, Katy, TX

>When you use your spokeshaves you have now do you find yourself wishing for something larger? Do you wish you could cover more ground than your spokeshaves are allowing you to do now? Are friends and family talking behind your back about you making you wish you had a larger tool? Is there a void in your spokeshave holder that can only be filled by a larger shave? When you can grasp the pebble out of my hand weedhopper...

Re: Vertitas Large Spokeshave? *LINK*

#3

An apology

Patrick Gibbons, Katy, TX

>Too early in the morning for me to be self-censoring. I meant to be funny but on rereading my response it sounds like I'm being an SOB. My meaning in the original post was if you think the spokeshaves you use now are not performing because they're too small or that being able to shave a larger surface would be easier, better, faster, etc., for your work then a larger shave is the way to go.

Re: Vertitas Large Spokeshave? *LINK*

#4

JL

My spokeshaves work fine....

JL

>I am just wondering whether or not a "giant" spokeshave would fill a use/niche that other tools won't fill (ignore the cat).


img

Re: Vertitas Large Spokeshave? *LINK*

#5

Re: Vertitas Large Spokeshave?

Pam Niedermayer, Austin, TX

>This spokeshave seems to be more about super long handles and very sturdy structure than a super big blade. So the question for you is: do you often find yourself bashing your hands on the work when you use one of your current shaves? If yes, get the big one.

Pam

Re: Vertitas Large Spokeshave? *LINK*

#6

Re: An apology

ThomD

>I don't think you said anythig wrong. I want one for making paddles but overall imagine most people can live without it.

Re: Vertitas Large Spokeshave? *LINK*

#7

Re: Vertitas Large Spokeshave? A testing time

ThomD

>For chairs and so forth, they could even be smaller, like the original Boggs ones. I think it would be useful for paddles. I went to buy one but in the end it was more expensive than I thought it was going to be, long story. So that sorta knocked me out of my purchasing plan and I haven't made another attempt.

Even on large work the regular size shaves sometimes bog in a cut, so it helps to be working a facet, and with a facet one normally has the required clearance, and the blade width is adequate. I'd love to test one, but I am not sure I would pay for the privelege at the moment.

Re: Vertitas Large Spokeshave? *LINK*

#8

JL

Re: Vertitas Large Spokeshave?

JL

>No, I don't find myself bashing my hands - but I'm working on the outside of long skinny pieces for the most part :). The only time I come close to bashing my hands is when I am using a spokeshave on the "waist" of the seats where they nip in. I don't think a large spokeshave would be of any help there.

As I said, I was wondering what sort of niche that they might fill. I don't make barrels as of yet - which is what they show in one of the Lee Valley photos.

Re: Vertitas Large Spokeshave? *LINK*

#9

Hi, I'm Ron I am addicted to spokeshaves

roninkokomo

>Of course you should get it!

Re: Vertitas Large Spokeshave? *LINK*

#10

Re: Vertitas Large Spokeshave?

Bill Houghton, Sebastopol, CA

>I would think, from my limited use of it so far, that you'd be better to spend your money on a cigar shave, like the classic Millers-Falls shave. I can't remember who is still currently selling these, but they're great for tight inside radii - much better, in my opinion (again: limited use so far), than a round-face shave.

Re: Vertitas Large Spokeshave? *LINK*

#11

Re: Hi, I'm Ron I am addicted to spokeshaves

Marv....... Northern California Lake Co.

>Hi Ron,

I tried spokeshaves once but they just didn't do it for me. Eggbeater drills and breast drills is what did me in. I ended up in rehab for a couple months. Came home, and immediately got hooked on handsaws. You think spokeshaves are bad!! Stay away from handsaws...trust me!

I'm wondering if hypnotism would help me.

Marv

Re: Vertitas Large Spokeshave? *LINK*

#12

You are getting veeeerrry sleeepy....you are...

Bill Houghton, Sebastopol, CA

>getting verryyy sleeeeepy....

You are packing all your best eggbeaters and handsaws in your car and driving west, toward Sebastopol....you are leaving them at a house just south of downtown....

When you awake, you will remember none of this....

Re: Vertitas Large Spokeshave? *LINK*

#13

I was amused

Bill Tindall, E.TN

>I have been sharpening fence posts and your message gave me this vision of a BIG spoke shave to make them them pointy.

Re: Vertitas Large Spokeshave? *LINK*

#14

I saw it...

Scott Burr in Ben Lomond, CA

>The humor that is. Well placed points on the why's and how's of spokeshaves.

Personally, JL is lookin for an excuse. Just MO.

Re: Vertitas Large Spokeshave? *LINK*

#15

JL

Excuse?? You need excuses for tools??

JL

>So many tools, so little time...

Actually, no. I'm really wondering if I can use one. If another tool will fill the need better (such as a small plane) - I'll get that instead.

Re: Vertitas Large Spokeshave? *LINK*

#16

Re: My spokeshaves work fine....

Wiley Horne--So. Calif.

>Just want to express admiration for that magnificent Windsor settee (?, not sure of terminology). It's really and truly grand.

For shaping curved pieces like that, I like the Lie Nielsen Boggs shave, because it does not have the gullwing shape--the handles are nearly in line with the blade casting, which means that it works very well one-handed. You can hold a stick in one hand, or like a violin, and shape it with the other hand holding the shave. It has just the right heft for that purpose, not too heavy to wield, bug heavy enough to stay in the cut easily.

The other essential tool for that kind of work (for me at least) are the thin, hard scrapers from Lee Valley

http://www.leevalley.com/wood/page.aspx?c=2&p=49548&cat=1,310,41069&ap=1

that are very flexible and will fair a curve very easily. Use one-handed or two-handed. They come jointed, so all you have to do is make one or two passes with a burnisher to put a hook on them, and they're aggressive enough to do real work.

Really beautiful Windsor piece you've made!!

Wiley

Re: Vertitas Large Spokeshave? *LINK*

#17

Chairmaker's Devils

Greg B�tit, Crown Point, NY

>A tool you will find is the bees knees for spindle making is the chairmaker's devil. Top one is made from the directions in Drew Langser's book, the bottom one is made by "Harris", who has a line of cocobolo spoke shaves.


img

Re: Vertitas Large Spokeshave? *LINK*

#18

Lee Valley's Chairmaker's Devils  *LINK*

Greg B�tit, Crown Point, NY

>


Lee Valley's "chair devils" are excellent!

Re: Vertitas Large Spokeshave? *LINK*

#19

also block planes

roninkokomo

>

Re: Vertitas Large Spokeshave? *LINK*

#20

Re: also block planes

Marv....... Northern California Lake Co.

>Hi Ron,

You have a good memory.....I must have mentioned my small collection of about a dozen block planes sometime in the past. I got started collecting them and it was kinda like throwing up, once I got started I couldn't quit.

Did I mention my collection of two old mechanical apple peelers that actually peel apples? Makes any shaped apple round like a ball. When it's done peeling, a little lever suddenly appears and pushes the apple off it's prongs and sets up and ready for another apple. Funny to watch. The crank is a very large gear with a wooden handle on it. Just a wonderful old tool. I haven't tried it but I think I could use it for turning wooden balls.

Marv

Re: Vertitas Large Spokeshave? *LINK*

#21

Yes Sir I do...

Scott Burr in Ben Lomond, CA

>I have pretty much what I need to get the job at hand done. I musta stopped that habbit a few years back. Still I can see/feel the "I want that" still.

Now it must be justified need not a simple want.