Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

100 vs. 101 Jennings Auger Bits

Posts

100 vs. 101 Jennings Auger Bits

#1

100 vs. 101 Jennings Auger Bits

David Brown

>Can someone kindly explain the difference between the fig. 100 and fig. 101 sets of jennings auger bits? I see fig. 100 on ebay more often than the 101, so I assume that is more normal. As a matter of principle, I only work domestic hardwoods, so I'm wanting bits for cherry, maple, walnut, etc.

Thanks for any help!

--Dave

Re: 100 vs. 101 Jennings Auger Bits

#3

Re: 100 vs. 101 Jennings Auger Bits

David Brown

>Thank you for the link to the very clear picture. On Ebay they are almost never that clear. So I assume that I want figure 101 for North American hardwood? Not sure what "gummy" means in a wood.

Thanks.

--Dave

Re: 100 vs. 101 Jennings Auger Bits

#4

Re: 100 vs. 101 Jennings Auger Bits

Ace Karner

>Gummy is pine and such, you want 100's for hardwood, 101's for softwood.

Re: 100 vs. 101 Jennings Auger Bits

#5

Ooo, Ooo, Mr. Karter!!!!!

Scott Burr in Ben Lomond, CA

>I have both. The 101's are much rarely found in the wild. The difference is the lead screw, The 101's have a tighter thread than the 100's.

I like the 101's for hardwood the 100's work well too provided their lead screws are sharp.

I've had the 100's strip while boring... Probably my technquie.

For that coarse, soft, and wet work notnin' beats some nice Erwin's.

Re: 100 vs. 101 Jennings Auger Bits

#6

Thought it was "Kotter"?

James Watriss

>Welcome back, welcome back, welcome baaaack...

Re: 100 vs. 101 Jennings Auger Bits

#7

My gnilleps kcus. What can I say...

Scott Burr in Ben Lomond, CA

>Emoclew Kcab indeed.