What fence is this?
David Miller from Iowa
>Picked this up in a box of stuff. The screw fits into my Stanley 78, but the fence is too small - ideas?
Knowledge You Can Build On — Est. 1998
What fence is this?
David Miller from Iowa
>Picked this up in a box of stuff. The screw fits into my Stanley 78, but the fence is too small - ideas?
#78 fence with a piece cut off?
Derek Cohen (in Perth, Australia)
>
Re: What fence is this?
steve mackay
>Sure its not a knock off ? Missing the bridge w/ hole and the raised portion on the longer arm is to long.
Could very well be Stanley
Bob Demers
>But an earlier No 78 fence. The small bridge and hole that was refered to earlier, was not always present.
Other Stanley planes that used a single rod fence were;
No 278 (a No 78 fence will fit this plane, but the proper No 278 has the hole for the adjusting rod in the center of it whereas, the 78 is offset)No 289 (Fence is heavier, hole for adj rod is centered, and has two holes drilled for adding a wooden fence wearing strip), and of course the other two variations of the venerable No 78;
The 78W (weatherstriping) and the A78 (has an aluminum fence)
There were also numerous clones of it, with similar fences design
The Sargent 79, the Millers-Falls 85 (both Sargent and MF made versions for Craftsman), the Record 078 (single rod, the 778 is the dual rod) and I believe Ohio to name a few that comes to mind.
I do have a spare fence which look like an earlier 78 fence, very similar to yours, but the thread on the rod is not quite the same as the thread cut into my 78 body, so it must be for Sargent or MF?
Not having either the MF or Sargent I do not know if they used different threads.
Anyone ever try?
Bob
I don't even want to know...
Scott Burr in Ben Lomond, CA
>What happened on that sheet before (or after) that pic was taken.
Its my shoe shine rag ! Sheesh, ROFL !
steve mackay
>
Re: I don't even want to know...
Marv....... Northern California Lake Co.
>Scott,
I was wondering the same thing, but thought I'd wait for you to ask about it......LOL
Sure doesn't look like shoe polish to me. I know s**t from shineola...LOL
Marv
Nice crop job :-)
Ellis Walentine
>
This deserves two, maybe three groans...
Bruce, a MN Galoot
>but I'm ROFLMAO!
That's one of the best I've seen in a long time, and I'll bet you couldn't wait to get it out.
Bruce
Bwahaaa haa haa!
Scott Burr in Ben Lomond, CA
>Thanks for the laugh Marv!
Re: Could very well be Stanley
David Matson
>The Millers Falls fence rod uses a 1/4 - 20 thread. I have a a MF 95 weather stripping plane that came missing the rod and fence and a 1/4 - 20 bolt fits perfectly. I received a craftsman fence rod kit manufactured by sargent as part of a group of planes off ebay. I excitingly tried to fit it to the millers falls plane only to find that the Sargent 79 fence rod uses a 1/4-24. Doesn't the Stanley 78 use a #12 size thread? Why can't they all just get along? :p
Re: Could very well be Stanley
Bill Houghton, Sebastopol, CA
>I believe Stanley uses a 1/4-28 thread.
Why doesnt that surprises me? Thanks
Bob Demers
>