Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Millers Falls Drill No. 5 help

Posts

Millers Falls Drill No. 5 help

#1

Millers Falls Drill No. 5 help

Clementine

>I have a Millers Falls No. 5 drill. On the main gear is stamped GB. This is not the owner's initials because it is under the red paint and I found one on Ebay with the same GB. I can find nothing on the internet on GB. Any idea what it is and what it means? Thanks

Re: Millers Falls Drill No. 5 help

#2

Re: Millers Falls Drill No. 5 help

Marv....... Northern California Lake Co.

>Hi Clem,

I have two very old No.5,s with castiron mainframes....no GB on these.

I have one newer one with the aluminum diecast mainframe, it has the GB. So, I will guess that the newer diecast drills will all have the GB on the main gear.

Sorry, not very helpful,

Marv

Re: Millers Falls Drill No. 5 help

#3

Goodell Pratt?

Wiley Horne--So. Calif.

>Hi All,

Dunno the answer, but looking at Randy Roeder's Millers Falls pages, he indicates there was a relationship between Goodell Pratt and Millers Falls. In the linked page, see below, some of the Millers Falls hand drills were actually made by Goodell Pratt during certain years. So. Is it possible the 'GB' actually is 'GP'? If so, that would point to Goodell Pratt as the maker.

Wiley.....reaching

Re: Millers Falls Drill No. 5 help

#4

Re: Millers Falls Drill No. 5 help

Bob Demers

>Are you sure its not GP as in Goodell-Pratt instead of GB?

Im asking because, after all the No 5 was introduced by GP before it becames Millers-Falls.

I have not look up my No 5 for these letters, but its somewhere in a box in the garage..:-)

Bob

Re: Millers Falls Drill No. 5 help

#6

Re: Millers Falls Drill No. 5 help

Todd Hughes

>Not sure but I would figure it is the foundry mark for the foundry that cast the parts like the "S" amd "B" foundry marks you see on Stanley tool parts....Todd

Re: Millers Falls Drill No. 5 help

#7

Re: Millers Falls Drill No. 5 help

Patrick Gibbons, Katy, TX

>Recalling info I read at the Millers Falls site, I believe that MF towards the end was having many products made for them (at a loss). I believe this was after they were bought out originally. If so, it may be the stamp of the company that made it for them.

Re: Millers Falls Drill No. 5 help

#8

Re: Millers Falls Drill No. 5 help

Marv....... Northern California Lake Co.

>Todd and Patrick are probably right because the GB only appears on the No.5A that has the die cast mainframe.

Marv

Re: Millers Falls Drill No. 5 help

#9

Re: Millers Falls Drill No. 5 help *LINK*

David Matson

>george's basement has a type study of MF No 5 drills. The 'GB' was seen on what he calls the type 15 which was right before they moved to the die-cast frame. No mention of what it means though.


http://www.georgesbasement.com/mfno135typestudy/No

Re: Millers Falls Drill No. 5 help

#10

Just a wacko idea

Roy Anderson

>Did they ever have parts made in Great Britain? That would be a GB, right?

Re: Millers Falls Drill No. 5 help

#11

Actually GB is short for...

Scott Burr in Ben Lomond, CA

>Getting Better ;^)