Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

OT--economic depression on Ebay?

Posts

OT--economic depression on Ebay?

#1

OT--economic depression on Ebay?

Wiley Horne--So. Calif.

>Not in the stuff I follow. In the past couple of days, I sniped $100 on a set of 1-8 Dwights French plough irons. And lost. Was also following an E. W. Carpenter unhandled screw arm plough that I quit on when it went through $200--it ended up $380 and change.

Maybe this is good news?? I can't figure it out.

Wiley

Re: OT--economic depression on Ebay?

#2

Re: OT--economic depression on Ebay?

steve mackay

>I noticed planes went low last month but they seem to have rebounded. Now its the doubled postage that makes me hesitate ! Almost equal with FED-EX Ground. And they give me that cool tracking thingie. If I could only get Grandma to use e-mail you could shut the USPS down and I would'nt notice.

Re: OT--economic depression on Ebay?

#3

Re: OT--economic depression on Ebay?

Alex Grigoriev

>Well, maybe economic hardship makes tool addicts to dive deeper into their habit...

Re: OT--economic depression on Ebay?

#4

Re: OT--economic depression on Ebay?

ThomD

>There is a theory that says that people do not go lighter on their hobies during hard time. Assuming they are still standing. That said I have heard it is depressed in certain areas I also follow. Hard to tell, those are sorta oddball collectory items, people may well feel this is the time to go for that stuff, how much cheaper could it get, then the prices are driven up if they aren't careful.

I haven't stopped buying stuff, but I am also selling a little. Kids are in rags, but I am still buying. I'm just lucky I have way to much to start with.

Re: OT--economic depression on Ebay?

#5

Ebay is HOT now !

Todd Hughes

>Ive been selling alot on the ebay for over 10 years now, mostly tools, and I think the prices now for many things are about as high as they ever were. Some things go up and down in price which is normal but on the whole I think prices are really up in general.

In the last month or so I have sold a painted 608 for $240, a rusty no etch Disston 99 with two broken teeth for $200, a D3 saw vice for $540, a nice English Stanley 78 for $212 and a Piton hammer for $585....Lots of other stuff to of course and most selling for what I thought was a very good price for me.

If the economy is affecting ebay ...well can't prove it by me. If anything I got to think that the bad economy results in more people shopping for "bargins" on the ebay instead of going to stores and shops.

I do know that many flea market sellers are really getting hurt and have a hard time selling stuff. This means lower prices for me though probably.

... I have often heard sellers moan about how bad ebay is and how prices are low but I think they do poorly because they don't know what to buy and how much to pay for it. That and don't present thier junk well so when they do poorly they blaim thier selling tool...ebay.

I have always done well selling on it but after taking Paypal back in October I have done even better I feel. I was very reluctant to sign up for paypal but I might have been wrong I think now for not taking it befor.......Todd

Re: OT--economic depression on Ebay?

#6

Re: Ebay is HOT now !

Marv....... Northern California Lake Co.

>Todd,

I missed that 3D vise you sold. That's an exceptional price for that vise. Was there something exceptional about the vise? Did it have a filing guide with it? Was it of the later design with the reenforced main casting?

I've sold some very nice 3D vises and didn't get even half what you got, even one with the filing guide. I do good write-ups and lots of pictures that actually show what the tool is.

Do you still have the closed auction that you can post the link, or send it to my email address? I'm always looking for those vises and can't figure out how I missed yours. I would have put it on my watch list.

I try to buy old junkers and refurb them and resell them. The 3D vise has an inherent wear problem that causes the clamping mechnism to no longer clamp a saw blade. The cam handle wears an indentation into the casting it bares on. Once that happens it will not clamp tight enough. I have fixed about 5 of them.

Thats the only saw vise I will recommend to people asking me about the best saw vise to buy.

Marv

Re: OT--economic depression on Ebay?

#7

Re: Ebay is HOT now ! *LINK*

Todd Hughes

>Heres the link to the auction for the vise. it was complete with the guide and was in very nice but far from mint condition. I got it at the PATINA tool show from a dealer inside for $90. Figured I would do well with it as the last one I sold a year or so ago went for about $380 if I remember right. Have sold just the guides for over $150....Todd


saw vise

Re: OT--economic depression on Ebay?

#8

Re: Ebay is HOT now !

Marv....... Northern California Lake Co.

>Thanks, Todd,

Very nice vise and guide. Thanks for posting it.

You might remember Rockwood04 sold one about two years ago that didn't even have the reenforced mainframe for just under $1100.

Last year I sold one that was never used and was Disston's latest design. I got it early in the morning on eBay on a Buy-It-Now for only $20. Still had the original paint down inside the jaws. I bought a guide separately and included it in the auction, hoping for a sale like yours. If I recall, it sold for only about $265. The buyer commented that he thought he had paid too much for it. It was far better than Rockwood's. One of my many eBay disappointments.

Thanks again,

Marv


img

Re: OT--economic depression on Ebay?

#9

Re: Ebay is HOT now !

Todd O. Cronkhite Maine Native Presently Away

>Marv, is that one of your custom made saw handles? I've never seen one with finger grips like that.

Re: OT--economic depression on Ebay?

#10

Re: Ebay is HOT now !

Marv....... Northern California Lake Co.

>Hi Todd,

Yes, it is....made it a few years ago. One of my first attempts at wheat carving. Wheat carving is very unforgiving, screw it up and you either live with it or make a new handle.

The handle is a replica Disston No.12...kinda, sorta. I started with an direct outline copy then added a few changes.

Below is a straight on shot of the medallion side.

Marv


img

Re: OT--economic depression on Ebay?

#11

Re: Ebay is HOT now !

Todd O. Cronkhite Maine Native, Presently Away

>The wheatlooks pretty darn good to me, as does the handle in general. I think that it would of looked better had you rounded the top of the inside of the handgrip area a bit more, but hey, it was one of your first attempts, so we'll let you slide on that. ;~)

Re: OT--economic depression on Ebay?

#12

Re: Ebay is HOT now !

Marv....... Northern California Lake Co.

>Todd,

That upper deviation conforms with the shaping for the forefinger on the otherside....maybe the picture below will show it enough to explain my excuse for not rounding that off more. The intent was to support my forefinger and not allow it to slip up and down. The convolutions were sculpted to fit my own fingers. At least that's my story and I'm sticking to it. :))

I promise I'll try to do better next time :))

Marv


img

Re: OT--economic depression on Ebay?

#13

Righteous!

Scott Burr in Ben Lomond, CA

>That is ONE sweet piece of work!