Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Making a wooden hinge

Posts

Making a wooden hinge

#1

Making a wooden hinge

Derek Cohen (in Perth, Australia)

>Ok. I can now proclaim the box complete.

Here is a pictorial of the hinge making:

We have to start somewhere, and what better than the basic stock ..



Set up as if you are to cut a dovetail, but mark out for a box joint instead ..



Saw merrily ..



Then saw some more ..



Stop sawing and do some paring instead ..



Transfer the marks and saw and chisel some more ..



Mark and drill for the steel pivot (I'm going to use a heavy nail) .. close your eyes if the 'lectricity blinds you ..



You should be able to do this ..



I used a brass washer as a template to scribe the rounds for the ends.



Time to get out the rasps to round out the ends.



... and then the inside of the pins (or whatever one calls these on a box joint) ..



You should be able to do this now ..



Now find something round to use as a template, draw a circle, cut it on the bandsaw, and finish on the disk sander (sometimes you just have to use machinery for the boring bits) ..



More shaping with rasps ..



Suddenly you have these ..



Not quite done. Turn them over and drill a million holes. These will act as keys when the hinges arev epoxied to the box. The box gets the same treatment.



This is what it was all about ...



And a final picture ..



Regards from Perth

Derek

Re: Making a wooden hinge

#3

Nice tutorial, thanks

Bill Houghton, Sebastopol, CA

>I've got a couple of wooden hinges my Dad made - we found them in the garage, and no one else wanted them; and I couldn't bear to toss them. He was NOT a hand tool guy, and I've wondered at times how he made them. Probably a table saw and sander. This looks like it was more fun.

I've heard the "pins" called "fingers" for finger joints - I don't know at what dimension they stop being fingers.

Re: Making a wooden hinge

#4

Re: Making a wooden hinge

R.J. Whelan

>Derek ... nice job.

I think there may have been a "drive-by" gloat in there somewhere - seems I noticed a very cool looking saw in one of the pictures.

How do you like the saw?

I have an IT saw and have been thinking about adding one of these beauties - I don't really need another DT saw but I've felt an old familiar itch ever since I first glimpsed this new saw.

RJ

Re: Making a wooden hinge

#5

Very nice, Derek, you continue to amaze.

Pam Niedermayer, Austin, TX

>

Re: Making a wooden hinge

#6

Re: Making a wooden hinge

Wiley Horne--So. Calif.

>Derek,

Just want to add my WOW! to everyone else's. That is a great tutorial, and a beautiful pair of hinges! Another great thing about it is how the method could be used for so many different looks and sizes. Very creative. Thanks much for showing this method with so much clarity.

Wiley

Re: Making a wooden hinge

#7

Dovetail saws

Derek Cohen (in Perth, Australia)

>Hi RJ

Well the Veritas dovetail saw was not intended as a gloat. I just chose to use it. I have a couple of others, which I use interchangeably. I'd say that my IT (purchased new on eBay a couple of years ago, then sharpened for me by Mike Wenzloff) is my go-to dovetail saw. However I can now say that this could be replaced by the Veritas. It cuts a fine kerf fast, tracks beautifully and has an excellent balance. I prefer the handle to the IT, which is a little to thin for my hand (which, according to Andrew Lunn - there is a gloat in the making! - is broader-than-average). I also have the original LN that is so similar to the IT, and I find the handle of this just right. The LN teeth are worn in now and so it does not catch as it used to do when new. Nice saw as well.

The Veritas easily holds its place with these saws on performance.

Regards from Perth

Derek

Re: Making a wooden hinge

#8

Family

Derek Cohen (in Perth, Australia)

>Hi Wiley

Thanks for reminding me. Yes, the method here is a basic one. I cannot imagine anything about it is really different/new. I was asked to post a tutorial earlier on, so I put this together as I made the hinges.

The design could be anything. I am not sure how well it comes out in the pictures, but what I have tried to do is base the (round and tapered) shape on the pad of the brace. I did this with the handle of the drawer as well. You can catch it in the base of the driver. That is the family marker.



Regards from Perth

Derek

Re: Making a wooden hinge

#9

what kind of wood is the box made of

Wayne

>

Re: Making a wooden hinge

#10

Re: what kind of wood is the box made of

Derek Cohen (in Perth, Australia)

>Hi Wayne

The box and hinges are Jarrah (the dark wood) and Tasmanian Oak (the light wood - this is not really an oak but a eucalypt). The brace is She-oak (the body) and pad is Tasmanian Blackwood).

Regards from Perth

Derek

Re: Making a wooden hinge

#11

Re: Making a wooden hinge

Victor Parisian

>Very cool. Thanks for posting.

As always I look forward to your educational postings.

Victor - Enjoying some chamber of commerce weather in Houston

Re: Making a wooden hinge

#12

Deja Vous?

Scott Burr in Ben Lomond, CA

>Am I going crazy or did you make an earlier post about making wooden hinges.

Scott, As usually questioning his sanity...

Re: Making a wooden hinge

#13

What is Deja Vous?

Marv....... Northern California Lake Co.

>

Re: Making a wooden hinge

#14

Or didja mean CRS?

Marv....... Northern California Lake Co.

>

Re: Making a wooden hinge

#15

Re: Deja Vous?

Dan Donaldson

>Doesn't matter ;-) He may have, but I (and maybe some others ) had a crs moment and a repost is appreciated ;-)

Re: Making a wooden hinge

#16

Was just jerk'n his chain :)) :)) :))

Marv....... Northern California Lake Co.

>

Re: Making a wooden hinge

#17

It's only deja vu

Bill Houghton, Sebastopol, CA

>if you're young enough to remember having seen it the first time.

Re: Making a wooden hinge

#18

CRS!?! Cool Rolled Steel...

Scott Burr in Ben Lomond, CA

>Marv? Take your Riddlin' lately?

8^)

Re: Making a wooden hinge

#19

For a moment there I though you were

Victor Parisian

>talking about Deejah an old girlfriend of mine from college days. Deejah, IIRC was named by her father after a voluptous Martian goddess from a paperback book. But I digress... Scott I think you mean deja vu.

As Yogi Bera said, "it was deja vu all over again."

Victor - heading to the shop

Re: Making a wooden hinge

#20

Yep, that's it. My French SUCKS!

Scott Burr in Ben Lomond, CA

>Must be time for my meds...

Re: Making a wooden hinge

#21

No one's used the famous Carlinism...

John in NM

>Vous JaDe, the feeling that none of this has ever happened before....

Re: Making a wooden hinge

#22

I like it!

Scott Burr in Ben Lomond, CA

>