Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Disston Black Diamond saw

Posts

Disston Black Diamond saw

#1

Disston Black Diamond saw

Bill Houghton, Sebastopol, CA

>The garage sales today yielded two handsaws, both Disston, both clean*. On one, the etch says "Black Diamond," and, as best I can read it from a preliminary cleanup, "No. 5."

Was Black Diamond a second - that is, lower quality - line for Disston, or just a marketing name for regular Disston saws?

*as well as a router made by some company called Porter-Cable. Odd thing. There's a long piece of black string hanging from the top, and the cutter attachment looks strange. It's got two knobs, like a proper router (Stanley, Lee Valley, etc.), at least. Otherwise, it's still too early in the season for much, it seems.

Re: Disston Black Diamond saw

#2

Re: Disston Black Diamond saw

Marv....... Northern California Lake Co.

>Black Diamond was one of the many saw companies that Disston bought out and allowed them to continue using their own name. A very good quality saw. The steel was probably produced by Disston.

Marv

Re: Disston Black Diamond saw

#3

Bill...correction...

Marv....... Northern California Lake Co.

>Bill,

Disston used many different names on their saws over the years, one of the names was Black Diamond. Black Diamond was not a company that Disston bought out as I previously stated, however, he bought out a lot of smaller companies in an attempt to reduce his competition. During the late 1800,s there were over 75 saw making companies in the US. The handsaw age.

Marv

Re: Disston Black Diamond saw

#4

Thanks

Bill Houghton, Sebastopol, CA

>If pretty saws like these keep following me home, my existing lack of space problem is going to get severe...hard to resist them, though, and prices around here are generally low.

Re: Disston Black Diamond saw

#5

Re: Disston Black Diamond saw

Todd Hughes

>Black Diamond was part of a series of cheaper saws made by Disston to be sold in hardware stores and that they didnt want thier names on. In my 1918 Disston catalog it is listed under "special Saws Etched to Order" along with the Challange, Blue Jacket and others. Interestingly it shows it's etch and it says Black Diamond Saw Co, Phila USA....was this a made up company? I would bet so.

The book "Hand Saw makers of North America" lists a Black Diamond Saw and Machine works as being in Ma. in the 1920 any connection? I don't know....maybe just chance?

I think more likely Disston was trying to ride the name of Nicholson "Black Diamond " files which were high quality files or maybe just sounded like a good name for a saw company.

In 1918 a doz. 26 inch Black Diamond saws sold for $15.25 while a doz No. 7 , which was the least expensive saw they sold marked Disston I believe, went for $20.00. Top of the line D115 went for $36....and you wonder why you don't see to many D115s eh?....Todd

Re: Disston Black Diamond saw

#6

I'm always struck

Bill Houghton, Sebastopol, CA

>by the high quality of older "second line" stuff. I'd have taken the saw for a regular Disston until I found the etch.