Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Gramercy Holdfast

Posts

Gramercy Holdfast

#1

Gramercy Holdfast

David Brown

>Hi, all. I just get a pair of Gramercy holdfast and boy was I impressed. I've never used holdfasts before. Instead I use a crappy little f-clamp that I took apart and put through one of the dog holes on my bench and then have to reach under to tighten. It only has about a 2" throat so it's limited to say the least. The Gramercy holdfasts were relatively cheap so I decided to try them. I'd been thinking about the veritas hold down thing, but it's $70+ for one. I'm sure most people here know about the holdfasts, but I was stunned at how well they worked. It makes me wonder who way back in the day said to themselves, if I bend/forge this metal just so it can be whacked with a mallet and hold stuff to a bench. What an idea! I actually doubted it would work well. I guess I shouldn't doubt the history books.

--Dave

Re: Gramercy Holdfast

#2

Re: Gramercy Holdfast

Derek Cohen (in Perth, Australia)

>Hi Dave

Yeah, I received a pair of these a few months back and agree that they are well made and easy to use. Why did I wait so long .... ?

Regards from Perth

Derek

Re: Gramercy Holdfast

#3

You can't beat 'em with a stick...

Patrick Gibbons, Katy, TX

>well, actually you can but they do work great.

Re: Gramercy Holdfast

#4

Comparing Gramercy vs Veritas Holdfast

Bill Tindall, E.TN

>I bought the LV when they first came out and were more affordable. Then I bought the Gramercy. I use the Gramercy when ever I can, which is almost always. They hold better and they are vastly quicker to use and unuse. Screwing and unscrewing the LV gets to be tedious. The only advantage of the LV is they fit over the vise screw because they don't poke into the bench very far.

Re: Gramercy Holdfast

#5

That just begs for a youtube video

James Watriss

>... of a guy beating a holdfast, with a stick, while it lies helplessly on his bench.

Re: Gramercy Holdfast

#6

You cand wack them with a mallet, carefully

Bill Tindall, E.TN

>I had never used these things before. So when they came I tried one out. I gave it a good whack with a large rubber mallet to see if they would hold anything. (I am inherently skeptical) Well hold they did. One does not need to whack very hard to make them hold better than a "c" clamp. For a while I thought I was not going to get it to relinquish its hold. I learned that one does not have to whack these things very hard to exert tremendous pressure. And they are so much faster to engage and disengage (if not whacked too hard) than a "C" clamp or the Veritas threaded model.

Re: Gramercy Holdfast

#7

Re: Real Holdfast vs Veritas Holdfast

ThomD

>I've had the record one, which is a lot like the LV one, for a long time. Another advantage to them is I don't need a hammer to use them, which at least 50% of the time is no advantage at all since one has a hammer in the hand when doing stuff like choping dovetails. Also they will set in a lot of surfaces a hold fast won't, like a 1/2" table top. Another good thing about them is that they were available for decades when the only regular holdfasts still available in tool catalogs were widely reported not to work. The big advantage to the real hold fast is that they can be made in about 10 minutes with about 2 dollars of materials.