Re: Anyone seen one like this? *LINK*
Marv....... Northern California Lake Co.
>Hi Stuart,
From your pictures, the saw looks to have been homemade from end to end. You didn't indicate any maker name or marks.
If the blade is only slightly bent, say, 1/32" bow for example, I wouldn't do much to straighten it unless it easily returns to straight with little effort. Sometimes you can make it worse. It will cut a straight dovetail even with a small wow to it.
If the back is straight and the blade isn't, that means there is uneven pressure on the blade inside the back. Often times you can straighten the blade by merely removing the back and then gently tapping it back on. But before you do anything, sharpen it first, do some dovetails and see how well it cuts.
I noticed there is a small crack in front of the front screw on the left side. I fix those kind of cracks by removing the handle, saw out the crack and glue in a thin piece of new wood.
Below is a link to some before and after pictures of a handle that had some major cracks. The saw is an Atkins floor saw.
Marv
Crack repairs in a saw handle