Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Saw Till

Posts

Saw Till

#1

Saw Till

David Miller from Iowa

>Tony's crosscut saw post below got me near the saws with my camera, so I thought I would post my saw till - admittedly rough, and even stuck in the utility room off the shop, but OK for now. Also, I was feeling guilty for posting a cheap new saw, so I thought my saw cred needed some shoring up.

These 38 saws represent the best of the best of all the saws that have passed through my hands. I have acquired perhaps 400 handsaws since 1980 (and passed up at least that many). About 5 years ago I forced myself to cut the collection to 100, then to 50, and now to 38.

The purpose of the saw till is not so much to display, as it does a poor job of that, rather to "regulate" the quantity of saws on hand. Every time I think about picking up a new saw, I force myself to consider the notion that if I do, one of these must be disposed - the strategy actually works to control slippery slope disease in my case.


img

Re: Saw Till

#2

Nice errrr till Dave...

Scott Burr in Ben Lomond, CA

>Quite the hanging going on at your place. OK on the left (front) peg, the last saw (or the one against the wall) WTF is that!?!

I'd like to see a pic of that bad boy, and see someone use it!

There are some nice saws hanging out at your place.

Re: Saw Till

#3

Ice Saw

David Miller from Iowa

>That is just an ice saw. I tried it on the river a couple years ago - worked pretty good, but I would hate to have to use it for a living.

Pic shows it next to my 3 TPI docking saw, the docking saw is 36" overall, I also would hate to make make my living with that.


img

Re: Saw Till

#4

He came, He saw, He conquered. ;-)

Thomas Skaggs, Foothills of Mount Level

>

Re: Saw Till

#5

Making a living with an Ice Saw

Bill Houghton, Sebastopol, CA

>And, a mere hundred years ago, it was common practice to have an ice shed - heavily insulated, probably about the size of a small one-car garage - in which the family would store ice over the summer, having cut it off the lake in the winter. So this, like a cross-cut saw, wedges, and sledgehammer, would have provided a great deal of healthful winter exercise.

As long, I imagine, as you didn't accidentally cut yourself adrift, like sawing off the limb that you're sitting on on the tree side.

Re: Saw Till

#6

Re: Making a living with an Ice Saw

Todd O. Cronkhite Maine Native Presently Away

>Scott, it's funny, but the saw that caught my eyes was the very saw that you inquired about.

Nice collections of saws David.

T.O.

Re: Saw Till

#7

Re: Nice errrr till Dave...

Victor P

>Good eyes there. At first glance I thought that was just the "shadow" from a shadow board. Like our shop teacher had back in high school.

Victor - turning the A/C on again in Houston