Re: question
Derek Cohen (in Perth, Australia)
>Hi Dan
I'm not sure that it is relevant to my question, but the lid will be held on with a set of wooden hinges similar to these ones (which I made for a previous box):
Regards from Perth
Derek
Re: How many tails?
#27Re: Here is a current example for assessment
Patrick Gibbons, Katy, TX
>You know Derek, I would think the stability of the wood and the atmosphere the box is kept in will have a lot to do with your results. At 3/8" maybe a small hidden panel pin would provide enough support without gluing a piece inside. Curl up a shaving, nail in the pin and then glue the shaving back down. I believe Lee Valley sells an English-made tool for making the shaving but I would think a careful use of a small gouge would do the trick. Perhaps this solution is not elegant enough.
Re: How many tails?
#28Re: Here is a current example for assessment
Ian (in Sydney, Australia)
>Hi Derek
rather than glue n a fillet, could you sneak in a couple of veneer keys.
Maybe taper them so from the front they look like dove tails?



