Hand Tool Work!!! *LINK*
Brent Smith, Montreal
>I just saw this on another site and thought some here might enjoy.
Hand Tool Work
Knowledge You Can Build On — Est. 1998
Hand Tool Work!!! *LINK*
Brent Smith, Montreal
>I just saw this on another site and thought some here might enjoy.
Hand Tool Work
Eh Gods ! . . .
steve mackay
>So THATs how it was done before OSHA. Well worth my time ! Like a wonderfull train wreck . . . couldn't tear my eyes away.
Re: Hand Tool Work!!!
Bill Houghton, Sebastopol, CA
>Thanks for finding this and posting it here.
It should inspire me to buy fewer tools. I counted eight for the shoemaker, four for the spoonmaker, and no more than ten for the chairmaker. Probably won't, though.
I was also intrigued by their workbenches, and by how effectively they used their bodies as workholding devices. And blown away by the hatchet work: I've had, once or twice, that kind of sense of range of control - coarse to fine simply by how I used the tool - with a drawknife, but never with a hatchet.
Of course, the -really good- wooden shoemakers...
Rob Brophy...lost in Niagara
>...can get the insides out in one piece. :-)
These make power tools look fussy and oh so slow
Patrick Gibbons, Katy, TX
>It makes me think that one other thing power tool woodworking has managed to screw up is making me look for micrometer perfection from hand tools when their real strength is speed and freedom developed from skill. Who cares how thin a shaving I can get from a plane? I want to get thick shavings quickly and precisely from a hatchet.
Speeded up
David Cockey
>The video is very likely being shown faster than the original speed. Old silent cameras ran at a variety of speeds, and the resulting movies frequently wind up speeded up when transfered to modern medium. But even if the real speed of work was only 2/3 or so of how it appears they were still working fast.
Mystic Seaport used to have a film of a traditional Norwegian boatbuilder. He started in the fall by cutting down the trees, worked through the winter with only hand tools, and had a new boat in the spring.
That's some big spoon bit. Thanks, Brent.
Pam Niedermayer, Austin, TX
>
Re: That's some big spoon bit. Thanks, Brent.
Wiley Horne--So. Calif.
>Agree! I also like the way he used it as a gouge at one point. Looked like hand to hand combat.
Wiley
Re: Hand Tool Work!!!
Marv....... Northern California Lake Co.
>Wondering how long it took to break those shoes in. Wear sandpaper socks? Wonder how good the arch support was. :)
Marv
I did notice
Bill Houghton, Sebastopol, CA
>that his customer looked a wee bit awkward in the shoes. I'm told they're very comfortable when made by a good clog-maker.
Re: These make power tools look fussy and oh so sl
ThomD
>I agree though I probably wouldn't say exactly that. Hand tools can be really fast. Splitting a log is faster that bandsawing. Hand planing is faster than power sanding, in some cases. Micro fitting is also often faster with say, a shoulder plane. I don't think one has to throw any one segment of the work aside for either speed or precision. It's a bit like fly fishing, it can be more effective if you pick your battles. Nobody wins the bass masters with a fly rod, but there are plenty of advantages that can be carefully exploited. And I love these films that really show that hand work is production, to quite FK.
Of course power is cool to, or machines. I can't believe I waited so long to get hoist in the shop, and there aren't even any motors. Also, a axe can be fast, but unless you are feeding a woodstove, you might end up saving a lot more valuable wood using a bandsaw.
Re: I did notice
Hank Knight
>They're comfortable after they're broken and all the splinters are gone.;>)
Re: Hand Tool Work!!!
Stephen Shepherd in the State of Deseret
>Brent,
Thanks for the link, interesting film, too bad they couldn't show it at the proper speed.
For one thing the birch used for the clogs was green therefore easier to work. It was the use of the tools I found interesting, especially when he turned the bow saw over and ran the clog against the stationary blade.
In the chair makers section, showing two people using one plane was fascinating, they looked like they had done it before and it looked like a dance. Also it appears that he splits out his tenons after cutting the shoulders.
Great stuff!
Stephen
about that dance
Tom Sontag - St. Louis
>I wondered why TWO guys did that hand plane work. Given the length of the piece and all, it looked like a one man job to me. Especially in a production setting; seemed inefficient. Any ideas?
Re: about that dance
Stephen Shepherd in the State of Deseret
>I have an idea why there are two guys planing this short chair leg. I notice when I plane a board (by myself) without a shooting board that one edge (the on side) is usually lower than the off side. I adjust for this during planing.
I think with two people the person on the tote would just see to it that the plane iron was properly engaged and the guy on the horn(s) could keep the plane flat. With two horns, one out each side of the front of the plane could help get the boards square.
Or maybe the other guy didn't have anything to do but wanted to be in the film.
Stephen
Re: Hand Tool Work!!!
James Watriss
>"I was also intrigued by their workbenches, and by how effectively they used their bodies as workholding devices."
Yeah, this started to sink in for me, too. It really reminds me of how I hear people say that the Japanese carpenters and woodworkers do their work. I know that people like to think oh so highly of their "european" benches, and that the Japanese way is so foreign and all.
Makes me remember hearing about how immigrants came here with just their tools, and that was it. I bet half of us in here, if we had to do that, would sink the ship bringing all that stuff.
I am inspired... and it was very, very cool seeing someone go to town with an old school pigsticker, the way they actually used to be used. I think I learned a thing or two about mortising by hand, just watching that.
I'm off to go watch it again.
Talk to y'all sooner or later...
...oh, and re: fewer tools...
James Watriss
>Now I feel like maybe I should look into buying a hatchet...
Re: Hand Tool Work!!!
Warren in Lancaster, PA
>You will notice that they hold their chisels by the handle, as is done in every period drawing I have seen. I don't know how some people got started holding the blade with their hand, leaving the handle flopping around above.
My wife used to wear
Bruce, a MN Galoot
>Bastad clogs all the time, swore they were the most comfortable shoes made, even in the winter, which is not insignificant in Minneapolis.
Bruce, in southern MN where winter is coming to an end.