Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Abrasive Comparison Chart *LINK*

Posts

Abrasive Comparison Chart *LINK*

#1

Abrasive Comparison Chart *LINK*

Tom MacGregor

>If you ever wondered how different grit sizes and abrasives relate to each other this page will answer your questions. Lots of good sharpening info., too.

"A comparison of grit sizes of belts, wheels, stones and hones used in knifemaking, sharpening and woodworking."


http://users.ameritech.net/knives/grits.htm

Re: Abrasive Comparison Chart *LINK*

#2

Re: Abrasive Comparison Chart *LINK*

Warren in Lancaster, PA

>I think that anybody who actually used these various media will realize the futility of making this kind of comparison. As an example of how misleading this chart can be, consider three stones which I use. The Queer Creek stone (now marketed as Clear Creek) is listed in the same range as the 1200 Japanese water stone. In practice the Japanese stone is considerably finer. The Washita stone is much finer than either, but is listed as much coarser than the other two. I could get a good edge going from Queer Creek to 1200 to Washita, but you would never know it from the chart.

In addition, different people will get different results from a stone depending on their technique. This is illustrated nicely by these pictures from Zowada razor which David Barnett brought to our attention a couple years ago.


Razor Bevels

Re: Abrasive Comparison Chart *LINK*

#3

Subtleties *LINK*

paul womack

>The variations you allude to are partially covered in a second chart on the same site

The first chart is purely particle size, and doesn't claim to be anything else.

BugBear


speed versus sharpness