Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

wood threader

Posts

wood threader

#1

wood threader

john lucas

>I need to make one of the wooden theaders. I looked for plans on the web this morning and couldn't find any. I want to build the kind that takes the V shaped metal cutter and a turned wooden handle. If someone can point me in the right direction I would appreciate it. Just a good clear photo would probably get me going. I've seen Roy Underhill make and use one but that was quite a while ago.

Re: wood threader

#2

Re: wood threader *LINK*

Tim Caley

>You can watch the program that Roy did on the subject at the link below.


Wood Threads online

Re: wood threader

#3

Re: wood threader

ThomD

>I've always wanted to be able to make the largish screws that make workbench screws. I think a better approach would be using a metal lathe. Those things really make screwmaking easy, which is to say they make making screwboxes easy also. There was a nice little South Bend lathe on craigs locally for about 140, last weekend, which doesn't even get one very far with screwboxes. There is one problem with using the metal tools on really large threads, it really requires a too high rate of tracking for the lead screws. There is a gearing solution to that, just so one knows should one need such a thing.

I second Roy, which also means it is in the books, I seem to recall.

Re: wood threader

#4

Re: wood threader

john lucas

>Thom I agree and I have a metal lathe, but I'm doing a woodturning demo on threading and want to show them all the possible ways of putting threads on and in wood. I will be using a commercial threader, a tap and die, hand chasing and hopefully can borrow a Beal threader from a friend. Besides I've just always wanted to build one of those.

Re: wood threader

#5

Thanks Tim, that should bet me there.

john lucas

>

Re: wood threader

#6

Re: wood threader

Tim Caley

>Is your presentation going to be verbal/hands-on or will there be video and/or Powerpoint to go with it? I would be interested in seeing it myself. Perhaps it could be turned into an article here on WoodCentral.

Re: wood threader

#7

Just watched it- perfect.

john lucas

>I remember watching that episode now. Hopefully I will have time to make one in the next 2 weeks. I'll post a photo when I get it done.

Re: wood threader

#8

Re: wood threader

ThomD

>Good luck, sounds like fun.

I have a Beal threader, but it does not seem like a great application for routing. It would work better if they had a flycutter attachment rather than the single point they have which gives such wildly varying cutting speeds. Was almost worth the price for the taps though so no harm no foul.

Re: wood threader

#9

Yes Tom and all

robert demers

>its indeed in Roy Underhill book, his third:

The woodwright's Work book, further explorations in traditional woodcraft.

Chapter three: Screwboxes and tap.

Incidently, he does mention the practical limitation size of threadbox, quote: The screwbox work well for screws up to 3 inches in diameter. For screws between 1 3/4 and 3 inches in diameter you will need to make a screwbox with two cutters, the first making a shallow cut and the second the full depth cut. Aligning these two cutters in the screwbox is a ''matter of great nicety''. Beyond three inches, say for cider or printing press, you will be obliged to cut the threads by hands. Unquote

Commercial screwbox and tap sets are available from Woodstock International, in range from 1/2 in to 1 1/2 in.

I have the 3/4 and 1 1/4 in set and they are lots of fun to use.

Bob, at home nursing a bad cold


img

Re: wood threader

#10

Close up of thread box pt 1 

Bob Demers

>


img

Re: wood threader

#11

Cloes up of thread box pt 2 

Bob Demers

>


img

Re: wood threader

#12

Re: wood threader

john lucas

>I route flutes in boxes that look like cupcakes and the cutter problem you mention is exactly what I have trouble with. A fly cutter like they use in ornamental lathes is what is needed to give really clean threads.

Re: wood threader

#13

Handles fitting

paul womack

>Does anyone know how Howard Card used to cut threads?

His work had a very high reputation.

BugBear