Japanese Hammer
PaulV
>Hi,
Can anyone identify the hammer in the photo? I think it's a Japanese pin hammer?. I was hoping to determine the manufacturer and vintage.
Thanks,
Paul
Knowledge You Can Build On — Est. 1998
Japanese Hammer
PaulV
>Hi,
Can anyone identify the hammer in the photo? I think it's a Japanese pin hammer?. I was hoping to determine the manufacturer and vintage.
Thanks,
Paul
Re: Japanese Hammer
charlie belden
>Not japanese. It's an english hammer - made for peaning/peening and small nails and brads driving and setting. Check Lee Valley, Highland Hardware or the like for hammers - you'll find they're still being made, though the name escapes me - Warrington - that's the name.
On second thought, looking at the handle - I'm guessing it's a jeweler's hammer. check
www.ottofrei.com for hammers and you'll not that the handles look a lot like the one in the pic you posted.
Re: Japanese Hammer
PaulV
>Thanks for the reply. I suppose I am just assuming it's Japanese. I got it from the wife of a friend who passed away several years ago. They lived in Japan for about 20 years (60's and 70's) and I also got some other tools with Japanese markings.
It appears to be nickel plated brass but the peen is pointed instead of flat or round. The other side of the hammer also has different Japanese characters but also the numbers 48.11.10
I'll keep searching for similar Jeweler's tools.
Similar but not Warrington
Bob Demers
>pattern style hammer. Also the slender taper handle makes it a light duty hammer, so jeweller type is probably right.
Most definitively metal working hammer IMO, saw making trade or jewellers?
I love those wonderful tapering handles on hammer, maybe more fragile but they sure gives a hammer a better balance feel.
Bob
Re: Similar but not Warrington
PaulV
>You are right, I love the feel of this hammer for small tasks or where you need a light touch...although I haven't found a need for the pointed end yet!
Re: Similar but not Warrington
Bob Demers
>Im thinking chasing metal or setting teeth on a saw?
Bob
Re: Japanese Hammer
R.J. Whelan
>Paul ... a Japanese friend gave me a hammer that is somewhat similar (at least on the pointy end) about 25 years ago.
He said it was a boat builders hammer. The head end was used to drive nails, then the pointed end was placed on the nail head and was struck with a mallet to set the nail.
I was building a dory at the time and used it as described and it worked quite well.
RJ
Re: Bingo
PaulV
>Bingo!
I think you nailed this one (sorry).
The guy who owned this hammer before me was in the shipping business in Japan. The pointed end does have a small flat...maybe 1mm...just like a nail-set.
Thanks, RJ
Re: Bingo
wilbur
>I'm not sure that it's exactly a Japanese boat builder's hammer. Here's a picture of one. You'll see that the pointy end looks a bit different.
Not that you couldn't use both for the same purpose, of course.
Re: Bingo
PaulV
>Certainly the head is much smaller on my hammer than in the photo. It must be for smaller brads or finish nails. The handle is long and narrow but has good balance.
Paul