Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Samurai sword

Posts

Samurai sword

#1

Samurai sword

John Hoffman

>Hi guys and Pam,

My Karate Master "asked" me to help fix his samurai sword. This is one of those things that people do to us when they hear we are woodworkers. Which I think to them means, we have all this talent and time and are just waiting for a project to come to us....

It a WWII vintage that had a wooden insert in the scabbard to protect the blade. The insert is gone and he wants the wooden insert replaced. This perplexes me greatly. The wooden insert goes into the curved scabbard. So the wood is kind of oval with a more taper at the blade side and of course the curve. I have no idea how to make this. Does anyone have any thoughts or a place to check out buying one?

thanks as always

Re: Samurai sword

#2

Re: Samurai sword

FK

>Here is some basic saya information:

http://www.scnf.org/saya.html

http://www.sayashi.com/articles/saya.htm

http://www.samurai-sword-shop.com/blog/

http://www.youtube.com/watch?v=A1igAQshYB0

Regards,

FK

Re: Samurai sword

#3

Re: Samurai sword

Pam Niedermayer, Austin, TX

>I don't know much about swords. I do know that the Japanese use special chisels to make the scabbards and these aren't cheap. As a temporary measure, perhaps you could figure out a way to insert wooden shims; but this is probably something your friend should buy, if possible.

Pam

Re: Samurai sword

#4

PS I'd ask ThomD, maybe Todd H

Pam Niedermayer, Austin, TX

>

Re: Samurai sword

#5

Re: Samurai sword

Todd Hughes

>I guess I sort of collect Japanese swords though for sure no expert

Am a little confused...Many WWII ...esp. factory produced japanese military swords [which most Japanese sword guys look down thier nose at and don't even consider to be swords]..swords will have a metal scabbard. These are lined with a heavy cloth,just glued in. Am looking at 2 right now and neither has any wood in it, of course can't see all the way down and guess possiable they could at the bottom but doesn't feel like it

Some WWII swords will have wooden scabbards that are covered by a leather cover which is sewn up the side and then laced the last couple inches. If this is what you are talking about and you are missing the entire scabbard and just have the leather cover then you have to make the scabbard.

I know the japanese scabbard makers use special tools and probably study for about 50 years but basicaly what you are doing is making the scabbard in two sections [split from top to bottom] with each section hollowed out so when they are glued together the blade fits in. Then shape the outside of the scabbard to fit his cover. Shouldn't be too hard to do but might be easier to just pick up a new scabbard, I see lots of fake chinese made swords and maybe one of thiers scabbards could be adpated to fit in the cover...don't know...Todd

Re: Samurai sword

#6

Re: Samurai sword

John Hoffman

>No you are correct. It has a metal scabbard so maybe it is supposed to have heavy cloth and not wood? I am not sure what type of cloth to use because wouldn't putting the blade into the scabbard cause the cloth to be sliced?

Thanks

JH

Re: Samurai sword

#7

Re: Samurai sword

FK

>Be careful of a cloth liner, it could hold moisture and cause rust.

You really do not need a set of custom chisels to make a basic saya.

http://www.knifeforums.com/forums/showtopic.php?tid/839318/post/1712604/hl/saya/fromsearch/1/#1712604

http://www.knifeforums.com/forums/showtopic.php?tid/845533/post/1774465/hl/saya/fromsearch/1/#1774465

http://www.knifeforums.com/forums/showtopic.php?tid/838341/post/1701500/hl/saya/fromsearch/1/#1701500

Regards,

FK

Re: Samurai sword

#8

Re: Samurai sword

Marv....... Northern California Lake Co.

>Hi John,

Perhaps the wood does not have to go all the way down to the lower tip. Maybe only about 3/4 of the way down from the top.

Sitting here thinking about how I might do it....I think I'd first wrap the sword with some kind of tough material and wrap it around the blade like a toilet paper roll is wound. This material would be thin, like only about 1/32" thick. You would want to use thin metal so the glue won't stick to it. I'm thinking copper, mainly because it is mallable and you can buy it in different thicknesses.

Then I would chose appropriate type wood and rip it into long thin strips, like 1/8" square, depending on how much space you have to work with between the blade and the inside of the metal scabbard. Then glue the strips together to the curvature of the blade. Then shape the wood to slip down into the scabbard snugly. You would then remove the sword and then pull the thin metal wrapping out. Now the sword should slip in and out easily.

You would probably want to finish off the top end with a solid piece of wood so you wouldn't see the ends of the strips and make it fit tightly at the top so it won't easily come out.

Marv

Re: Samurai sword

#9

Looks like I was wrong

Todd Hughes

>Ok I went and looked again with the aid of a flash light and looks like the two metal scabbard ARE lined with sometype of wood.From the top it does sort of looks like glue impregnated cloth [it's hard to see it very well !] but I dug a piece out and I think it might be strips of bamboo. Looks like the scabbard is lined with three seperate stips which are glued to the sides of scabbard inside. If you are going to replace them you will probably have to remove the screw at the top and take off the throat of the scabbard to get the strips down in it.....Todd

Re: Samurai sword

#10

Re: Looks like I was wrong

ThomD

>Good to hear you were scaring me a little there. Sounds like a relatively complicated project for a sword of dubious value. The sword either isn't worth the work or it's worth a proper restoration.

The special chisels are pretty simple things, could probably be fabed out of a regular chisel. I would think a more realistic option would be a router plane, or a router. It shouldn't be all that impossible to fit the sword which is relatively geometric in outline, but fitting the inside of the existing part sounds like a bigger deal. Could be wrong.

Re: Samurai sword

#11

Re: Looks like I was wrong

Todd Hughes

>actually wouldn't need any chisels I don't think special or other wise...it looks like it is just thin [1/16 inch ?] strips of wood [or maybe bamboo] that is put inside the metal scabbard.....Todd

Re: Samurai sword

#12

Be glad....

Todd Hughes

>that you don't have to make one of these....


img

Re: Samurai sword

#13

Re: Looks like I was wrong

Pam Niedermayer, Austin, TX

>My assumption on the special chisel was it was used to mortise the slot from a solid piece of wood, not that a scabbard couldn't be built from pieces. Given today's glues, probably no one does it that way anymore.

Pam