Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Plane Rehab Question

Posts

Plane Rehab Question

#1

Plane Rehab Question

Tom MacGregor

>Has anyone ever used a springpin to mount the yoke on a frog? Any reason why it wouldn't work OK? The original pin and brass wheel are unsalvageable after some ham-brain used grips to adjust it - probably with the levercap clamped down for all its worth. It's been cranked so hard the threaded rod on the frog is loose in the hole. I'm surprised the top of the blade isn't mushroomed, too. Nearing completion on a very abused V&B 907C that somehow survived with excellent wood.

Re: Plane Rehab Question

#2

Re: Plane Rehab Question

Bill Houghton, Sebastopol, CA

>Worth a try. In theory, I suppose, the yoke is critical to keeping the iron in position, and roll pins, being hollow, are a little weak; If you could find the right size of solid stock, it would probably be better. A little Loctite* could help hold it in place.

Some of the stronger Loctite grades might help with the replacement adjuster stud, too.

*Before someone starts teasing me about obsessing with Loctite...it's just a really handy tool sometimes, and more reversible than epoxy.

Re: Plane Rehab Question

#3

Your'e in good company Bill

Bob Demers

>Loctite is used a lot in the aerospace industry, in the Airforce it gives new meaning to the old saying: It keep a loose collection of spare parts flying in close formation :-)

Bob, Loctite user since 1975

Re: Plane Rehab Question

#4

Got you beat

Bill Houghton, Sebastopol, CA

>I was introduced to it when I started riding a motorcycle in 1968 - I'd never heard your definition of an airplane before, but it applies to motorcycles, too (though less so to the BMW I rode than to, say, old Triumphs, which could shake off a part in a few seconds).

Re: Plane Rehab Question

#5

What can I say, I must be younger :-)

Bob Demers

>That stuff sure is amazing isnt it? it hold parts tenaciously yet breaks its bond when required. Althought they make a few different strenght for different applications, it is wise to use the right one for the right application, or you'll have fun breaking screwdriver tips, screws, then finally the bond :-)

For everyday uses, I uses mostly the red one

Bob, the young one (yes, Denis)

Re: Plane Rehab Question

#6

LOL! Must feel good for you to say it! :-D

Denis Ch�nard, Orl�ans, Ont.

>