Stanley No 6 and a couple of 60 1/2
-e-
>Any advise on pricing?
Knowledge You Can Build On — Est. 1998
Stanley No 6 and a couple of 60 1/2
-e-
>Any advise on pricing?
Re: Stanley No 6 and a couple of 60 1/2
C.R. Miller
>Check out Handplane Central:
http://www.handplane.com/stanley-no-6-fore-plane -- For the No. 6
http://www.handplane.com/stanley-no-60-12-block-plane -- For the No. 60-1/2
Re: Stanley No 6 and a couple of 60 1/2
Bill Houghton, Sebastopol, CA
>What you've pictured there isn't a No. 6, but a No. 10, a far more valuable plane.
In the upper right corner of the picture is what appears to be a No. 4 with a corrugated sole.
Stanley 10?
Wiley Horne--So. Calif.
>Agree with Bill--that's not a No. 6. It's in the 10 series of rebate (rabbit) planes. If it is marked, it's pretty valuable. I just checked completed ebay auctions for the past week, and two 10-1/2's went for $113 and $131 and one No. 10 went for about $88. These were in nice shape, but so is yours. How is yours marked?
Wiley
Re: Stanley 10?
-e-
>yes, you're right ... wrong picture for the no 6 --
and i've forgotten if this is marked ... i'm going to have to check. i think this is a #10
Re: Stanley 10?
Bill Houghton, Sebastopol, CA
>It's clearly a No. 10 in configuration - the question is whether it's a Stanley or someone else's. For reasons beyond my ken, Stanleys have more value than other makes.
Look closely at the sides at the mouth - where the cutting iron sticks through the side. These planes break most often at this area, and, if it's been broken or broken and repaired poorly, value obviously drops; if it's been broken and repaired well, it can still be a great user plane, but collector value drops.
Re: Stanley 10?
-e-
>i don't think it's a stanley --
but it is in good shape -- no cracks or breaks
Re: Stanley No 6 and a couple of 60 1/2
-e-
>nice reference ... THANKS!