Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Coffee Time

Posts

Coffee Time

#1

Coffee Time

ThomD

>This is an unusual one. I am making a trestle coffee table from the Thomas Moser design in his book, though I used extensive computer drafting to fit the table to my space, and make some detail changes.

Last week I was scouring Craigslist, etc... for Singer machines that sew leather. I need one to convert to an automatic gimping machine to make brogues, and another to sew uppers. I want to set these up on treadle bases for easy control and so the kids can use them for their projects also.

I found a great deal where I got 3 industrial Singers for average prices of 19 dollars, and also a few treadle bases. One of these was converted to a table with the piece of plate glass in the photo. I haven't finished the wooden table top yet, it is glued up and ready for planing. I decided to use the glass table, and I like the effect quite well. The wood is closest to the uprights in colour, the lighter shades have been washed out with the flash. The overall effect is several times as nice as in my picture.

I have often thought that with trestle tables the really interesting stuff is hidden by the table top. Unfortunately, in this case the only bad joints are an overly open upper bridle joint, and a piece of tear-out in the stretcher top. These were lovingly crafted, but turned out badly, and I was not greatly consoled by the fact they wouldn't show with the original top. With the glass top they are on prominent display. The one consolation is that I don't see well enough these days to see these flaws as I would have a few years back. The top is a little too small but I like it well enough I might consider making a proper base for it some day.


img

Re: Coffee Time

#2

Re: Coffee Time 

ThomD

>


img

Re: Coffee Time

#3

Re: So, tell me about your plans for the future...

ThomD

>Hmm, not a lot of feedback. Should I paint the base?

I once had a boss with a glass desk... Come to think of it I still do.


img

Re: Coffee Time

#4

Nice recycling

Bill Houghton, Sebastopol, CA

>Was that the base for a sewing machine, or did you pick it up at the same time while getting sewing machines?

Re: Coffee Time

#5

Re: Nice recycling

ThomD

>The base is a cherry base I made on my way to completing a Moser inspired coffee table. It is pretty much all by hand except I imagine I chopped the mortises in a machine. All the surfaces and edges are hand planed.

The plate glass top is from the sewing machine treadle table. People buy the old machine bases and turn them into tables. They are too high for coffee tables, and too small for dinning. A side table I guess.

When the top is finished it will go on the base, but people seem to like the glass top. As a woodworker I tend not to think of glass for a table top material.

My original plan is attached.


img

Re: Coffee Time

#6

Re: Coffee Time

Wiley Horne--So. Calif.

>Thom,

I'm being hindered by rigid thinking. But it goes like this. When I think of trestle tables, they're all wood. When I think of glasstop tables, they have a metal base. Okay, okay, now everybody is going to post a zillion counterexamples--which would be great because then I could be more open to the possibilities. Plus, it may be that the glass top works best in that situation because wood would take up more visual space, whereas the glass being visually open doesn't divide the room. But still, I would want to see the wooden top on that beautiful base, before making a final decision.

Question about the joint where the posts go into the feet--are those double-tenoned? Or what is the best way to do it?

Thanks, Wiley

Re: Coffee Time

#7

Oh, sorry, I misunderstood

Bill Houghton, Sebastopol, CA

>Clearly I didn't read very well - thought it was the base you'd recycled.

I'm with you, not thinking of glass as a table top material. When I do think of it that way, I tend to think of chrome or sleek black metal, rather than wood. It is interesting, seeing the normally-hidden bits.

Nice picture of "the boss," too.

Re: Coffee Time

#8

Re: Coffee Time

Pam Niedermayer, Austin, TX

>I think that's a beautiful table, Thom, very nice work, even with my qualms about glass table tops. You're exactly right, the normal wooden table top would have hidden most of the trestle base.

Pam

Re: Coffee Time

#9

Hell No...

Scott Burr in Ben Lomond, CA

>Thom it's beautiful. Recycled matls. Cleaned up well and put you put it to such good use also.

I'd like to see a before pic of the wood while it was it's former self.

To be honest it's not my style, but who cares!

You produced a very nice table!

Re: Coffee Time

#10

Re: Oh, sorry, I misunderstood

ThomD

>Not to worry, I always write too much. The wooden top will still be installed at some point, if only to reduce the need for constant windexing!

Re: Coffee Time

#11

Re: Hell No...

ThomD

>I think this is wood I actually cut from a tree at some point. For one thing because I tend to leave the chainsaw milled stuff thick. I somewhat believe is buying the 4/4 stock, and making the thicker stuff, seems to work out best.

One problem with chainsaw milling is it works so fast I end up with decades of wood, and loose track of where it came from.

The top was really nice when I got it off the Singer table. I would have posted a pic, but I forgot to download it off craigslist and it is now too late.

Re: Coffee Time

#12

Re: Coffee Time

ThomD

>Thanks Pam. I have a tressle dining room table, and I occasionally lie under it and look up at the underside (say while dusting). One can almost imagine living in a timber frame house... :)

Re: Coffee Time

#13

Oh Well, Thom... My mom would to have seen it...

Scott Burr in Ben Lomond, CA

>My Nona was a Seamstress. More like a Taylor, but she didn't want to piss-off the guys. I'd liked to see it.

Re: Coffee Time

#14

superb

Tom Sontag - St. Louis

>This is a terrific idea whose time has come. I love your proportions and choice of wood.