Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Stanley 750ish chisels

Posts

Stanley 750ish chisels

#1

Stanley 750ish chisels

Bill Houghton, Sebastopol, CA

>Are the Stanley 750 chisels all marked "750" on them? If I've got a 750ish socket type chisel marked "Stanley" on the socket, or "Stanley made in USA," is this something other than a 750?

Re: Stanley 750ish chisels

#2

Re: Stanley 750ish chisels

Todd Hughes

>Is an unnumbered 750 chisel, not all of them were numbered but it is still a 750....Todd

Re: Stanley 750ish chisels

#3

Re: Stanley 750ish chisels

Hank Knight

>Bill,

I don't think anybody knows the answer to your question. It has been discussed here and elsewhere a number of times and no one has any definitive information about "750ish" chisels. I remember a post a year or so ago complaining that the poster had purchased a "Stanley 750" on eBay, but when the chisel arrived it was marked only "Stanley" with no "750" on the socket. The post generate a lot of comment; but, again, nothing difinitive about the bona fides of just plain "Stanley" chisels as 750s. As I recall the poster sent it back and demanded the return ofhis money. Although I haven't paid attention to eBay prices in a long time. it seems that chisels marked "750" command higher prices than plain Stanleys.

There are some 750 styled chisels that are marked with a "D". The consensus, if there is one, is that these are Stanley "Definace" chisles - a Stanley line that didn't have quite the finish of Stanley's top-of-the-line stuff. I have some of all three: 750s, Stanley and Stanley D. I think I can tell that the Ds have less finish grinding and polish on the blades, but other than that, I can't tell any difference between any of them.

My $.02 and worth probably less.

Hank

Re: Stanley 750ish chisels

#4

Re: Stanley 750ish chisels

Todd Hughes

>I see it like this...I have a Stanley jack plane that dates to the late 1870s, is 14 inch long with a 2 inch wide cutter.Doesn't have a number on it...now what plane is this? I and I think just about everbody else would say it's a number 5 even though Stanley didn't start to put numbers on thier planes till 1885. Just because my plane [like these chisels] ain't numbered doesn't make it not a number 5 plane......Todd

Re: Stanley 750ish chisels

#5

I agree completely.

Hank Knight

>

Re: Stanley 750ish chisels

#6

Re: Stanley 750ish chisels

ThomD

>Todd, that's a subtly different question. Because the plane numbering system serves more than one purpose. It's partly brand related, and partly size related. If the company always called such planes five but didn't mark them so, then it would be a 5. If the marking and the description occured at the same time then I don't see how even identical earlier planes could be called "5s" except as a mater of sizing. Even if they were earlier called 5s the marked planes could still have a different cache to collectors, or there could be other notable changes that occured at the same time the marking came in. For instance modern metal stuff often has decorative elements that go hand in hand with the implementation of CNC manufacturing. I certainly know virtually no tool history...