Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

My tool of the week (long and a little silly)

Posts

My tool of the week (long and a little silly)

#1

My tool of the week (long and a little silly)

Bill Houghton, Sebastopol, CA

>I've been mining the one garage sale from which, a couple of weeks back, I purchased a router plane, Stanley 65-1/2, and woodie spokeshave. I think the vein's pretty well played out (I'm down to parts tools; I turned down a Defiance plane today; the price was way too high at $12). Today's only buy may be the world's smallest breast drill - see center drill in the photo below. To the left is a regular Stanley 741 breast drill; to the right is a North Bros. 1530, a small eggbeater (about 2/3 the size of a Millers-Falls No. 2).

My initial thought was that this was from a child's toolkit, but, as I examine it more closely, a new theory is emerging. Note that the dominant color is green (there's even residual green paint on the chuck) - clearly, it's a leprechaun's breast drill. Does anyone know if there's an Irish version of Wood Central? I'm picturing posting this on the classifieds there - straight across for a pot of gold.

I could be wrong, though...stamped on the crank handle (the only visible mark so far) is "Made in Germany." It's far too old to have been built after reunification, so I presume it dates from before WWII. Had it been built for the leprechaun trade, surely the stamp would have been in Gaeilge (Irish Gaelic - I had to look it up).

At any rate, it's actually quite a good drill - with a little lubrication, I was able to drill a decent hole in a piece of scrap.

Bill, who realizes I may need a grandkid or three...


img

Re: My tool of the week (long and a little silly)

#2

Re: My tool of the week (long and a little silly)

Marv....... Northern California Lake Co.

>Hi Bill,

I have two of what you have there, but not the German one. That little green one is very small as breast drill. A breast drill like the Stanley you have there is meant to be pressed against your chest or shoulder. I have a number of Germany made drills and they are all green. The ones I have are all eggbeaters without the breast plate. That little guy is very interesting, if I were you, I'd keep it.

Marv

Re: My tool of the week (long and a little silly)

#3

Re: My tool of the week (long and a little silly)

Todd Hughes

>I've seen more then a few of those little drills and I am pretty sure they are post war, probably from the 1950s or even later.

Lots of people think because it doesn't say "west" Germany it must be pre war but that isn't always true. Actually wasn't till 1974 that Germanys courts ruled that items from west germany should be marked as such and not just Germany. I've had plenty of 1960s VWs and they and parts would just be marked Germany

I think Germany must have had quite a post war industry making hand operated drills because I see LOTS of them. Some are clear knock offs of Millers Falls others are a little different. Ones I have seen look to be of lower quality ( like most other German tools in my experance) then US made tools.

Occasionaly I see these little push drills that almost look like toys that will be marked "made in British zone, Germany" that must date to right after the war...kind of neato,..maybe......Todd

Re: My tool of the week (long and a little silly)

#4

Re: My tool of the week

Marv....... Northern California Lake Co.

>Todd,

It seems silly to have a breast plate on such a small drill, don'tcha think? Perhaps it was made for kids as Bill suggested?

Marv

Re: My tool of the week (long and a little silly)

#5

German tools

Wiley Horne--So. Calif.

>Todd,

Are you speaking mainly of post-war German tools? Reason I ask is that all my experience (and it's less than yours) with German tools is that they are exemplary. Couple examples:

Couple of years ago, I had occasion to buy a mllimeter sized drill for an odd-sized hole. Bought a 5.5mm drill from a US woodworker supply place. Drill was German marked. That is the sharpest and cleanest-cutting drill I have ever seen, and by considerable. Wasn't even close. You had to handle it carefully.

Other examples from my limited experience: Bessey clamps, Gros Stabil clamps. Two Cherries (Kirschen) gouges. Festool power tools. There is no US manufacture close to these, that I know of.

Wiley

Re: My tool of the week (long and a little silly)

#6

Given its presumed market

Bill Houghton, Sebastopol, CA

>this little drill's actually fairly substantial. It's got a good sturdy chuck, cast iron gear wheel, iron or steel driven gear (where some American eggbeaters use die castings).

Re: My tool of the week (long and a little silly)

#7

I have to disagree on one count Wiley...

Scott Burr in Ben Lomond, CA

>IME, Jorgy k-body style clamps out preform Bessey clamps any day of the week. Never played with Gros Stabil so I can't compare those.

Re: My tool of the week (long and a little silly)

#8

Re: My tool of the week (long and a little silly)

ThomD

>Certainly was a time when kids tools were well made, I guess the idea was they might actually use them. An example of the quality child's tool is the Singer 20 sewing machine. If you find one of those at a decent price, count yourself lucky.

Re: My tool of the week (long and a little silly)

#9

Re: I have to disagree on one count Wiley...

Wiley Horne--So. Calif.

>Thanks Scott,

I spoke too quickly, and was not aware of the Jorgenson's. Can you tell some more about them? Who carries them?

WIley

Re: My tool of the week (long and a little silly)

#10

If i remember correctly...

Scott Burr in Ben Lomond, CA

>I got mine at Woodcraft during what was Jorgy's 100 year anniversary and they had them for 1/2 off. People went wild for them. It was fondly known as the "jorgy orgy" on most of the WW web sites.

I used them side by side with Besseys, I like the jorgy's better for a number of reasons.

Re: My tool of the week (long and a little silly)

#11

Re: I have to disagree on one count Wiley... *LINK*

wilbur

>I think Scott is referring to the Jorgensen Cabinet Master clamps. I've seen them at Home Depot, of all places. Lee Valley carries them, as does Amazon, and you can order them direct from the manufacturer.

Another US clamp manufacturer that makes really great clamps is Wetzler. I think that their F-style clamps are better than Bessey or Gro� Stabil (or Jorgensen, for that matter).


Jorgensen Cabinet Master clamps

Re: My tool of the week (long and a little silly)

#12

Yup Wilbur, thoes are the ones.

Scott Burr in Ben Lomond, CA

>